Shropshire · England
Bath Re-enamelling in Danesford
Local bath re-enamelling for Danesford: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
How we handle bath re-enamelling in Danesford
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s wear marks under the taps and a coating lifting around the plughole, we can typically put it right, whatever the material.
Big or small, it’s backed by a one-year guarantee in Danesford and across Shropshire.
- Location
- Danesford (WV15, WV16)
- County
- Shropshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Danesford
Danesford is about 1 mile south-east of Bridgnorth, in Shropshire. We visit homes and businesses in Danesford, so you do not need to take anything anywhere. Danesford is one of 433 places in Shropshire we cover. You can also see our page for Birmingham, about 22 miles away.
Jobs in WV15 and WV16 are booked in the same way as anywhere else. If you are just outside Danesford, we cover Eardington (1 mile south-west), Oldbury (1 mile north-west), Bridgnorth (1 mile north-west), Tasley (2 miles north-west) and The Down (3 miles west). Further out, we also cover Madeley (8 miles north), Shifnal (10 miles north), Broseley (7 miles north-west), Albrighton (9 miles north-east), Much Wenlock (8 miles north-west) and Cleobury Mortimer (10 miles south).
Near you in Danesford
Our customers here include homes close to The Swan Inn, Oldbury Wells School and Church of St Mary Magdalene, among other places. You will also find Stanmore Country Park (1.1 miles north-east) and St Mary's Bluecoat CofE (VA) Primary School (1.1 miles north). Other landmarks nearby include Bridgnorth (1.2 miles north-west) and Bridgnorth Castle (1.2 miles north-west).
Landlord and trade work in Danesford
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
For anyone letting property in or around Danesford, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The process
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Have a window or extractor fan available
- Ensure the area is dry
- Tell us about any previous repairs or coatings
Get a quote
Upload a picture of the damage and one of the whole item, with your WV15 postcode, and we’ll come back with a fixed quote.
Related advice
Questions from Danesford
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Common problems we fix in Danesford
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- A coating lifting around the plughole
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
Before you book anyone
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the pictures show
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Also near Danesford
Also in Danesford
What affects the price in Danesford
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- How many areas need work
- How easy the damage is to reach
- How hard the colour is to match
- Any earlier repairs that need removing first
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
- Details of any past repairs
- Daylight if possible, and no flash reflection
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Store bottles off the bath
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
