East Riding of Yorkshire · England
Bath Re-enamelling for Danthorpe homes
Local bath re-enamelling for Danthorpe: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
About Danthorpe
Danthorpe is about 8 miles east of Sutton-on-Hull, in East Riding of Yorkshire. Anywhere in HU12, a technician comes to you. Danthorpe is one of 299 places in East Riding of Yorkshire where we work. You can also see our page for Leeds, about 59 miles away.
Our visits in HU12 work the same way as everywhere else we cover. Other places close to Danthorpe include Elstronwick (1 mile west), Burton Pidsea (1 mile south), Humbleton (2 miles north-west), Lelley (2 miles west) and Burstwick (3 miles south). Further out, we also cover Beverley (14 miles west), Hessle (14 miles west), Cottingham (13 miles west), Hornsea (10 miles north), Hedon (4 miles south-west) and Anlaby (13 miles west).
Around Danthorpe
We visit homes around Burton Pidsea Primary School, Church of St Lawrence and Black Bull pub, among other places. Other landmarks nearby include Burstwick Castle (2.6 miles south-west).
How we handle bath re-enamelling in Danthorpe
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We regularly repair cast iron baths, pressed steel baths and Victorian roll-tops, and people most often call us about staining under the taps and around the waste and thin, worn enamel in places.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Danthorpe (HU12)
- Area hub
- East Riding of Yorkshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Do not use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Wash away dyes and oils after use
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Also near Danthorpe
Also in Danthorpe
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Repairing versus replacing in Danthorpe
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Everything repaired in place
- Every repair guaranteed for a year
- Colour mixed on the day to match
- A fixed quote before booking
Take a look at our full price list and resurfacing vs replacement cost guide.
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day for most jobs. The room is left tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Get a quote
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Danthorpe questions
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
For landlords and businesses
If you manage property in Danthorpe, we will quote for several properties at once. Send photos for each one and we will price them together.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
What we’re called out for in Danthorpe
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Most people get in touch after spotting something like this:
- Chips and rust in more than one place
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
- A roll-top that’s seen better days
What your quote should include
- How the room is protected while they work
- How changes to the job are handled
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How much damage there is
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- Any details about the material
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
For a price in Danthorpe, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
