Kent · England
Bath re-enamelling & resurfacing in Deerton Street, Kent
Problem with your bath in Deerton Street? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- Stains that will not shift
Signs you need bath re-enamelling in Deerton Street
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
Common reasons people in Deerton Street contact us include:
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- Several chips and rust patches
- A bath in a colour that no longer suits
What to look for in a quote
- Whether cleaning and preparation are in the price
- Aftercare advice
- Whether there are any call-out or travel charges
- What happens if they find more damage
Bath re-enamelling in Deerton Street without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. We work on acrylic baths, pressed steel baths and cast iron baths, and people most often call us about a coloured bath you want in white and a bath that stays dull however much you clean it.
You get a one-year guarantee, the same in Deerton Street as everywhere else we work.
- Location
- Deerton Street (ME9)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
How to get a price
For a price in Deerton Street, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Nearby places to Deerton Street
Other services in Deerton Street
Landlord and trade work in Deerton Street
We work for landlords, letting agents and housing providers in Deerton Street as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Covering Deerton Street
Deerton Street is about 3 miles west of Faversham, in Kent. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Deerton Street is one of 922 towns and villages in Kent where we work. Our jobs stretch from Deerton Street to London (41 miles away).
Our visits in ME9 are booked in the same way as anywhere else. You’ll find streets such as Deerton Street and Lower Road. Nearby, we also work in Norton Ash (1 mile south), Teynham Street (1 mile north), Lewson Street (1 mile south-west), Teynham (1 mile west) and Four Oaks (1 mile south-east). Within a short drive, we also cover Maidstone (14 miles west), Ashford (13 miles south), Canterbury (11 miles east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (3 miles east).
Local landmarks in Deerton Street
We visit homes around Teynham Parochial Church of England Primary School and Church of St Mary. Deerton Street’s nearest station is Teynham station, about 1 mile west of the centre. A little further out are Newnham Castle (3.3 miles south) and Sittingbourne Heritage Museum (3.8 miles west).
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Rinse off hair dye, oils and bath bombs immediately
- Avoid suction-cup mats
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Common questions in Deerton Street
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Repair or replace in Deerton Street?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- We will tell you if it’s not worth repairing
- No need to remove anything
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
Read our full price list and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How easy the damage is to reach
- Unusual colours or finishes
- How many areas need work
- Doing more than one item at once
Our prices are the same across the UK, so there’s no premium for Deerton Street. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
