Kent · England

Bath re-enamelling & resurfacing in Four Oaks, Kent

Full bath re-enamelling and resurfacing for homes and businesses in Four Oaks and across Kent. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Four Oaks

About our bath re-enamelling in Four Oaks

Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair basins & shower trays, Victorian roll-tops and acrylic baths, and common reasons people get in touch are a coating lifting around the plughole and enamel that’s lost its shine and feels rough.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Before and after: an old basin refinished to bright white
Area
Four Oaks (ME13)
Region
Kent
Warranty
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • A bath that is rusted through
  • Plumbing leaks, which need a plumber
  • A cast iron or steel bath that’s cracked right through

If in doubt, send photos and we will say what we think.

Materials we work on in Four Oaks

  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths

Why repair rather than replace?

Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Four Oaks. What changes the price is the job itself: the material, the amount of damage and how many items.

Why us?

  • Dust sheets down, tidy finish
  • Most jobs done in one visit
  • Straight answers about what a repair can do
  • Same prices wherever you are

Read our pricing and bath cost comparison.

Our work in Four Oaks

Four Oaks is about 1 mile west of Faversham, in Kent. Jobs in Four Oaks are booked in like any other job: a fixed price from your photos, then a visit to do the work. Four Oaks is one of 922 places in Kent where we work. You can also see our page for London, about 43 miles away.

Here we cover the ME13 postcode area. Other places close to Four Oaks include Ospringe (1 mile south-east), Norton Ash (1 mile west), Oare (1 mile north-east), Deerton Street (1 mile north-west) and Davington (1 mile east). We also work in nearby towns such as Maidstone (15 miles west), Ashford (13 miles south), Canterbury (10 miles east), Sittingbourne (5 miles west), Whitstable (8 miles east) and Herne Bay (13 miles east).

Landmarks near Four Oaks

Our clients here include homes close to St Mary's Church, Luddenham School and The Abbey School and the streets around them. The nearest railway station is Faversham station, about 1.8 miles south-east. Further afield, we also cover the area around Newnham Castle (3.3 miles south-west).

Map of Four Oaks © OpenStreetMap contributors

Common questions in Four Oaks

Can pets and children be at home?

Keep pets and children away from the work area on the day.

Does re-enamelling smell?

Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.

Which areas do you work in?

Everywhere in the UK, Four Oaks included. Travel is included in the price.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Kent.

How soon can you come?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Never use suction bath mats
  • Dry the bath after use to stop limescale
  • Rinse off hair dye, oils and bath bombs immediately
  • Fix dripping taps quickly

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

Do you need bath re-enamelling in Four Oaks?

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

People usually call us after spotting something like this:

  • A dull, rough surface that won’t come clean
  • Staining under the taps and around the waste
  • An outdated colour you’d like to change
  • Lots of chips and rust spots

What to look for in a quote

  • How your room will be protected
  • How long it needs to cure
  • If travel is included in the price
  • What happens if they find more damage

How to compare quotes

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

How it works

Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a full day from start to finish. Before we go, we will explain how long to leave it and how to care for it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Before we arrive

  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area
  • Let us know which floor the room is on

Getting a price

Send us photos of the damage and one of the whole item, with your ME13 postcode, and we’ll reply with a fixed quote.

Get a free quote

Related advice

What affects the price in Four Oaks

Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:

  • What kind of damage it is
  • The size and number of damaged areas
  • Access to the area
  • Unusual colours or finishes

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Send photos for a quote

You can take the pictures on your phone. Just make sure we can see:

  • Daylight if possible, and no flash reflection
  • Any details about the material
  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Landlord and trade work in Four Oaks

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.