Kent · England
Bath re-enamelling & resurfacing in Norton Ash, Kent
Problem with your bath in Norton Ash? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Stains that will not shift
Bath re-enamelling in Norton Ash without replacing anything
We don’t move the bath, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the day after. We work on basins & shower trays, pressed steel baths and cast iron baths, and common reasons people get in touch are staining under the taps and around the waste and lots of chips and rust spots.
Big or small, you get the same one-year guarantee in Norton Ash and across Kent.
- Area
- Norton Ash (ME9)
- County
- Kent
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Norton Ash?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Norton Ash. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Norton Ash clients choose us
- Repair technicians who travel to you, UK-wide
- Colour-matched on site
- We will tell you if it’s not worth repairing
- Everything repaired in place
Take a look at our full price list and bath cost comparison.
Keeping it looking good
Nothing complicated is needed:
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Don’t let dyes or oils sit on the finish
- Have chips seen to early
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What we’re called out for in Norton Ash
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Customers usually contact us about:
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
What to look for in a quote
- What the guarantee covers, and for how long
- How to care for the finish
- How the room is protected while they work
- Whether the price covers travel
What we do, step by step
You do not need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take most of the day, and you can get on with other things while we’re there.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the next day.
Before we arrive
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
Getting a price
For a price in Norton Ash, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Places near Norton Ash
Other services in Norton Ash
Your questions about bath re-enamelling in Norton Ash
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Can you quote from photos?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- How many areas need work
- Unusual colours or finishes
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- Something in shot to show the size
- Any details about the material
- Whether it’s been repaired or coated before
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
When we’d advise against a repair
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Norton Ash and nearby
Norton Ash is about 3 miles west of Faversham, in Kent. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Norton Ash is one of 922 places in Kent where we work. You can also see our page for London, about 42 miles away.
Postcode districts we cover here: ME9. Jobs here include addresses on London Road and Lower Norton Lane and the roads around them. If you’re just outside Norton Ash, we cover Deerton Street (1 mile north), Lewson Street (1 mile south-west), Tickham (1 mile south-west), Teynham (1 mile north-west) and Teynham Street (1 mile north). We also work in nearby towns such as Maidstone (14 miles west), Ashford (13 miles south), Canterbury (11 miles east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (3 miles east).
Local landmarks in Norton Ash
Typical jobs here are in homes near Church of St Mary, Teynham Parochial Church of England Primary School and The Plough Inn. Norton Ash’s nearest station is Teynham station, about 1.1 miles north-west of the centre. Nearby you will also find Newnham Castle (2.7 miles south-west) and Sittingbourne Heritage Museum (3.8 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
