Staffordshire · England
Bath Re-enamelling in Denstone
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Denstone. Send photos for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- Chips and rust in more than one place
Denstone: your questions answered
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Do you resurface freestanding baths?
Yes. Inside and out.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What areas do you cover?
We cover the entire UK, including Denstone and the rest of Staffordshire. Just include your postcode and we will offer you dates.
Do you come to Denstone?
Yes. We work across the UK and travel to Denstone and the rest of Staffordshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Bath re-enamelling in Denstone without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for several chips and rust patches and thin, worn enamel in places, on cast iron baths, basins & shower trays and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee in Denstone and across Staffordshire.
- Area
- Denstone (ST14)
- Region
- Staffordshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Denstone. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Every repair guaranteed for a year
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- Fixed prices from your pictures
See our pricing or guide to resurfacing and replacement costs.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- A bath split right through the body
Send us photos and we’ll tell you honestly.
Materials we work on in Denstone
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
What affects the price in Denstone
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- What kind of damage it is
- Whether old repairs or coatings need taking off
- Doing more than one item at once
The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
Getting a price from photos
Most quotes are done from pictures alone. To help us price it:
- Any details about the material
- A picture taken from further back
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Upload a picture of the damage and a wider shot of the whole item, and tell us you are in Denstone, and we’ll reply with a fixed quote.
What we are called out for in Denstone
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a photo:
- Lots of chips and rust spots
- A coloured bath you want in white
- Stains that will not shift
- Enamel that is lost its shine and feels rough
What to look for in a quote
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- Who turns up on the day
About Denstone
Denstone is about 4 miles north of Uttoxeter, in Staffordshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Denstone is one of 512 towns and villages in Staffordshire where we work. You can also see our page for Birmingham, about 34 miles away.
Every address in ST14 is covered. From College Road, Linden Close and Marlpit Lane or a nearby road, we can come to you. Denstone sits on or near the B5031, which makes travel easy. Nearby, we also work in Stubwood (1 mile south), Prestwood (1 mile north), Rocester (1 mile south-east), Alton (2 miles north-west) and Norbury (2 miles north-east). Further out, we also cover Stafford (15 miles south-west), Burton upon Trent (14 miles south-east), Longton (12 miles west), Rugeley (15 miles south), Stone (13 miles west) and Leek (12 miles north-west).
Around Denstone
We visit homes around The JCB Academy, All Saints CofE Academy Denstone and Church of All Saints. The closest station to Denstone is Uttoxeter station, roughly 4.6 miles south of the centre. A little further out are Alton Castle (1.8 miles north-west) and Cheadle Hospital (5.7 miles west). Open spaces near Denstone include Cotton Dell.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We clean up when we’re done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us if there are stairs or a lift
- Ensure the area is dry
- Point us to the nearest place to park
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Also in Denstone
Landlord and trade work in Denstone
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
If you manage property in Denstone, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Aftercare tips
After the repair has cured, a few habits help it last:
- Do not use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Store bottles off the bath
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
