South Lanarkshire · Scotland
Bath Re-enamelling in Devonburn
Bath re-enamelling in and around Devonburn: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Bath re-enamelling in Devonburn, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include an old resurfacing that’s failing and a bath that stays dull however much you clean it, in Victorian roll-tops, basins & shower trays and pressed steel baths.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Devonburn (ML11)
- County
- South Lanarkshire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The size and number of damaged areas
- Doing more than one item at once
- Where the damage is and how we get to it
- How hard the colour is to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
- The material, if you know it
- Daylight if possible, and no flash reflection
Upload a photo of the damage and one of the entire item, with your ML11 postcode, and we will reply with a fixed quote.
Your questions about bath re-enamelling in Devonburn
How long is the bath unusable?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do you cover the whole of South Lanarkshire?
We cover the whole UK, including Devonburn and the rest of South Lanarkshire. Send your postcode with your photos and we’ll confirm dates.
Can you do the outside of a roll-top?
Yes. Inside and out.
Can you quote from pictures?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Will the price change on the day?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Common problems we fix in Devonburn
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for any of the following:
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
- Thin, worn enamel in places
- Chips and rust in more than one place
Before booking anyone
- What the guarantee covers, and for how long
- Whether the price covers travel
- How the colour is matched
- When it can be used again
Landlords, agents and businesses in Devonburn
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Repairing versus replacing in Devonburn
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Work done at your home or business
- Colour-matched on site
- Nothing taken out or refitted
- Every repair guaranteed for a year
Read our full price list and resurfacing vs replacement cost guide.
Our work in Devonburn
Devonburn is about 7 miles south of Carluke, in South Lanarkshire. Jobs in Devonburn are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover all 139 towns and villages in South Lanarkshire, from the larger towns to small villages. Our jobs stretch from Devonburn to Glasgow (about 22 miles away).
Every address in ML11 is covered. You’ll find streets such as Bog Road and Devonburn Road. Neighbouring places we cover include Brocketsbrae (1 mile north-west), Lesmahagow (1 mile north-west), New Trows (1 mile west), Dillarburn (2 miles north) and Auchenheath (3 miles north-west). Within a short drive, we also cover Hamilton (12 miles north-west), Blantyre (14 miles north-west), Larkhall (8 miles north-west), Carluke (7 miles north), Lanark (4 miles north-east) and Strathaven (9 miles west).
Landmarks near Devonburn
We visit homes around Lesmahagow High School and Lesmahagow Old Parish Church, among other places. For rail, the closest station is Lanark station, about 4.5 miles north-east of the centre. Other landmarks nearby include Birkwood Castle (1.2 miles west) and New Lanark Visitor Centre (3.8 miles north-east). For a walk, there’s Black Hill and Lanark Loch.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Read more
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Nearby places to Devonburn
More services for Devonburn
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
