South Lanarkshire · Scotland
Bath Re-enamelling in Dillarburn
Fixed-price bath re-enamelling in Dillarburn and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
About our bath re-enamelling in Dillarburn
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. If you are dealing with a peeling or bubbling previous coating and chips and rust in more than one place, we can generally put it right, whatever the material.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Area
- Dillarburn (ML11)
- Area hub
- South Lanarkshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Dillarburn
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
For anyone letting property in or around Dillarburn, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Do you need bath re-enamelling in Dillarburn?
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
It’s worth getting a quote if you see:
- Stains that will not shift
- Lots of chips and rust spots
- A peeling or bubbling previous coating
- Thin, worn enamel in places
What your quote should include
- Whether the colour is mixed to match
- What protection goes down before work starts
- Whether a trained technician does the job
- How to care for the finish
How it works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Move bottles, mats and clutter away from the area
- Open a window if you can
- Let us know which floor the room is on
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Common questions in Dillarburn
Which areas do you work in?
We work UK-wide. Prices do not change with location.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you come to Dillarburn?
We do. Technicians travel to Dillarburn from across the region, and the price is the same as everywhere else.
When a repair is not the answer
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
- A bath that is rusted through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Dillarburn
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
How to look after the repair
Most damage we see is avoidable. These habits help:
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Where we work around Dillarburn
Dillarburn is about 6 miles south of Carluke, in South Lanarkshire. Across the ML11 area, we carry out the work at your property. We work in 139 places across South Lanarkshire. We work right across the region, from Dillarburn to Glasgow (about 21 miles away).
Our visits in ML11 are booked in the same way as anywhere else. If you’re just outside Dillarburn, we cover Brocketsbrae (1 mile south), Lesmahagow (1 mile south-west), Devonburn (2 miles south), Auchenheath (2 miles north-west) and New Trows (2 miles south-west). Within a short drive, we also cover East Kilbride (15 miles north-west), Hamilton (11 miles north-west), Uddingston (14 miles north-west), Blantyre (13 miles north-west), Larkhall (7 miles north-west) and Carluke (6 miles north).
Near you in Dillarburn
In Dillarburn, that means homes near Abbeygreen Church and Lesmahagow High School. For rail, the closest station is Lanark station, about 4.1 miles east. Other landmarks nearby include Birkwood Castle (1.6 miles south-west) and Craignethan Castle (3.1 miles north). The countryside around Dillarburn includes Lanark Loch and Black Hill.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- Access to the area
- What kind of damage it is
- How many areas need work
- The material and finish
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Send photos for a quote
Good pictures mean an accurate price. Here’s what helps:
- Natural light rather than flash
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Also near Dillarburn
Also in Dillarburn
About our accreditations · Every repair comes with a one-year guarantee.
