South Lanarkshire · Scotland
Bath Re-enamelling in New Trows
Bath re-enamelling across New Trows and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
Bath re-enamelling in New Trows without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a coloured bath you want in white and lots of chips and rust spots, on pressed steel baths, Victorian roll-tops and cast iron baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- New Trows (ML11)
- Region
- South Lanarkshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Have chips seen to early
- Store bottles off the bath
- Never use suction bath mats
- Fix dripping taps quickly
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About New Trows
New Trows is about 8 miles south of Carluke, in South Lanarkshire. Jobs in New Trows are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover 139 places in South Lanarkshire, from the larger towns to small villages. Our jobs stretch from New Trows to Glasgow (about 22 miles away).
Our technicians cover all of ML11. Neighbouring places we cover include Lesmahagow (1 mile north), Brocketsbrae (1 mile north-east), Devonburn (1 mile east), Dillarburn (2 miles north-east) and Auchenheath (3 miles north). Within a short drive, we also cover East Kilbride (15 miles north-west), Hamilton (12 miles north-west), Blantyre (14 miles north-west), Larkhall (8 miles north), Carluke (8 miles north) and Lanark (6 miles north-east).
What’s near New Trows
In New Trows, that means homes near Lesmahagow High School and Lesmahagow Old Parish Church. Further afield, we also cover the area around Douglas Castle (4.7 miles south-east) and Birkwood Castle (0.5 miles north). Open spaces near New Trows include Black Hill.
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What affects the price in New Trows
Resurfacing from £350. We do not charge extra for travel to New Trows. The price depends on:
- How easy the damage is to reach
- How many items we do on one visit
- The material and finish
- The size and number of damaged areas
The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Quotes from your photos
You can normally get a fixed quote without us visiting. To make it quick:
- Any details about the material
- Whether it’s been repaired or coated before
- A photo taken from further back
- Your postcode, so we can check dates
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
How the visit works
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take the best part of a day, and we’ll tell you if anything changes.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Read more
Nearby places to New Trows
What else we do in New Trows
When to call us in New Trows
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Look out for these signs:
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
What to look for in a quote
- Whether a trained technician does the job
- How soon you can use it again
- What the guarantee covers, and for how long
- If travel is included in the price
Landlord and trade work in New Trows
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
FAQs for New Trows
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
