Clackmannanshire · Scotland
Bath re-enamelling & resurfacing in Tullibody, Clackmannanshire
Our repair technicians come to Tullibody for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
How we handle bath re-enamelling in Tullibody
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, with the bath ready to use the following day. If you are dealing with a coloured bath you want in white and a peeling or bubbling previous coating, we can usually put it right.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Where
- Tullibody (FK10)
- Region
- Clackmannanshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
About Tullibody
Tullibody is about 2 miles north-west of Alloa, in Clackmannanshire. Customers in Tullibody get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Tullibody is one of 16 places in Clackmannanshire we cover. We work right across the region, from Tullibody to Glasgow (26 miles away).
Postcode districts we cover here: FK10. Streets in the area include Main Street, Delph Road and The Tannery. If you’re just outside Tullibody, we cover Cambus (1 mile south-west), Menstrie (1 mile north-west), Alva (2 miles north-east), Manor Powis (2 miles west) and South Alloa (2 miles south-east). Larger places within reach include Tillicoultry (4 miles east), Kincardine (6 miles south-east), Dollar (7 miles east), Clackmannan (4 miles south-east) and Coalsnaughton (4 miles east).
Near you in Tullibody
In Tullibody, that means homes near Dunmar House Hotel, Lornshill Academy and Tullibody Old Kirk and the streets around them. For rail, the closest station is Alloa station, about 2.1 miles south-east of the centre. Further afield, we also cover the area around Tullibody Heritage Museum (less than half a mile south) and Stirling Castle (4.4 miles west). For a walk, there’s Airthrey Loch and Myreton Hill.
Common problems we fix in Tullibody
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, normally first under the taps and around the waste.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
- Thin, worn enamel in places
Before booking anyone
- How your room will be protected
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
- Whether the colour is mixed to match
How to look after the repair
To keep it looking its best for years:
- Don’t leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs straight away
- Stick to gentle, non-abrasive cleaners
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
What happens on the day
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow the best part of a day. Before leaving, we tell you how long to leave it and how to care for it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let us know about parking or access
- Point us to the nearest place to park
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Places near Tullibody
What else we do in Tullibody
When we’d advise against a repair
Some jobs aren’t right for a repair, including:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
What affects the price in Tullibody
Resurfacing from £350. We do not charge extra for travel to Tullibody. The price depends on:
- The colour and finish to match
- How much damage there is
- The type of damage
- Any earlier repairs that need removing first
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- A clear, close picture of the problem area
- Something in shot to show the size
- Where you are, by postcode
- A wider photo showing the whole bath
Most clients in Tullibody get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Landlords, agents and businesses in Tullibody
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Tullibody, we will quote for several properties at once. Send photos for each one and we will price them together.
FAQs for Tullibody
Can a failed resurfacing be redone?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Do you cover Tullibody?
Yes, we do. We send a technician to Tullibody for every job, with no extra charge for travel.
Are there extra charges for Tullibody?
We do not add a call-out fee. Your fixed quote includes everything.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
