Somerset · England
Bath re-enamelling & resurfacing in Donyatt, Somerset
Bath re-enamelling for Donyatt, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Donyatt: your questions answered
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How much does bath re-enamelling cost in Donyatt?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Do you work in Donyatt?
Yes. We cover the whole UK and travel to Donyatt. Send photos and we will quote, or call 0345 017 0787.
Bath re-enamelling in Donyatt without replacing anything
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We are frequently asked to fix a coloured bath you want in white and worn patches where water runs and sits, on basins & shower trays, Victorian roll-tops and pressed steel baths.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Donyatt (TA19)
- Area hub
- Somerset
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Donyatt
Also in Donyatt
Signs you need bath re-enamelling in Donyatt
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Most people contact us after spotting something like this:
- Stains that will not shift
- An old resurfacing that’s failing
- A roll-top that’s seen better days
- Several chips and rust patches
What to look for in a quote
- If travel is included in the price
- How soon you can use it again
- Whether the colour is mixed to match
- What preparation is included
Keeping it looking good
It’s all simple stuff:
- Dry the bath after use to stop limescale
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Where we work around Donyatt
Donyatt is about 4 miles north of Chard, in Somerset. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Donyatt is one of 640 towns and villages in Somerset we cover.
Every address in TA19 is covered. Streets in the area include Donyatt Hill and Shave Lane, all of which we cover. We also travel to Horton (1 mile west), Broadway (1 mile north-west), Ilminster (1 mile east), Dowlish Ford (2 miles east) and Rapps (2 miles north). We also work in nearby towns such as Taunton (9 miles north-west), Bridgwater (14 miles north), Yeovil (13 miles east), Chard (4 miles south), Wellington (13 miles west) and Crewkerne (7 miles south-east).
Local landmarks in Donyatt
We visit homes around Church of St Mary, The George pub and Neroche Primary School. A little further out are Chard Community Hospital (3.5 miles south) and Chard Plumbing Museum (3.8 miles south).
Landlords, agents and businesses in Donyatt
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Advice
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
Take a look at our full price list and bath cost comparison.
What affects the price in Donyatt
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- Whether we combine several jobs
- The type of damage
- Where the damage is and how we get to it
Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- Any details about the material
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- A picture taken from further back
If you are in Donyatt and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- A cast iron or steel bath that is cracked right through
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
Send us photos and we will tell you honestly before you book.
Materials we work on in Donyatt
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
