Wiltshire · England
Bath Re-enamelling in Dunge
Bath re-enamelling for Dunge, without a refit. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coloured bath you want in white
How to look after the repair
So the finish stays in good condition:
- Don’t use the bath until it has fully cured
- Have chips seen to early
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Bath re-enamelling at your home in Dunge
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair basins & shower trays, pressed steel baths and cast iron baths, and the jobs we see most are worn patches where water runs and sits and an outdated colour you’d like to change.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Dunge (BA14)
- Region
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Dunge?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
These are the problems we’re asked about most:
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
What to look for in a quote
- How long the guarantee is and what it covers
- What prep work is covered
- What protection goes down before work starts
- What aftercare is recommended
Common questions in Dunge
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
About Dunge
Dunge is about 3 miles north-east of Westbury, in Wiltshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 425 places in Wiltshire, from the larger towns to small villages.
All of BA14 is covered, from the main roads to the quietest streets. If you are just outside Dunge, we cover Heywood (1 mile south-west), Yarnbrook (2 miles west), Dursley (2 miles west), Hawkeridge (2 miles west) and Bratton (2 miles south-east). We also work in nearby towns such as Trowbridge (3 miles north-west), Chippenham (12 miles north), Calne (12 miles north-east), Devizes (9 miles north-east), Westbury (3 miles south-west) and Melksham (6 miles north).
Landmarks near Dunge
Around Dunge, we work in homes near West Ashton Church of England Primary School and Church of St John the Evangelist and the streets around them. For rail, the closest station is Westbury station, about 2.5 miles south-west. Other landmarks nearby include Trowbridge Castle (3.1 miles north-west) and Trowbridge Community Hospital (3.4 miles north-west).
What else we do in Dunge
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- The material and finish
- The colour and finish to match
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- Nothing taken out or refitted
- We come to you, anywhere in the UK
- Most jobs done in one visit
- One-year guarantee on every repair
See our prices page and bath cost comparison.
Landlords, agents and businesses in Dunge
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
When a repair isn’t the answer
To be straight with you, there are a few things a repair won’t fix:
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly.
Materials we work on in Dunge
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
What happens on the day
We agree an arrival time beforehand. On site, it takes the best part of a day. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
