Wiltshire · England
Bath re-enamelling & resurfacing in Yarnbrook, Wiltshire
Fixed-price bath re-enamelling in Yarnbrook and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
About our bath re-enamelling in Yarnbrook
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. Typical jobs include a dull, rough surface that won’t come clean and several chips and rust patches, in basins & shower trays, Victorian roll-tops and pressed steel baths.
Every repair is covered by our one-year guarantee.
- Location
- Yarnbrook (BA14)
- Region
- Wiltshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Yarnbrook
What else we do in Yarnbrook
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Acrylic that moves when you stand in it
- A bath split right through the body
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we will say what we think.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Questions from Yarnbrook
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Covering Yarnbrook
Yarnbrook is about 2 miles south of Trowbridge, in Wiltshire. Across the BA14 area, we come to you. We work in all 425 towns and villages in Wiltshire, from the larger towns to small villages.
Our visits in BA14 are booked in the same way as anywhere else. Local streets include Westbury Road and Hawkeridge Road, and we cover them all. We also travel to Dursley (1 mile south-west), Heywood (1 mile south), Hawkeridge (1 mile south-west), Dunge (2 miles east) and Westbury (2 miles south). Larger places within reach include Chippenham (12 miles north), Calne (13 miles north-east), Devizes (10 miles north-east), Melksham (6 miles north-east), Warminster (6 miles south) and Corsham (9 miles north).
Landmarks near Yarnbrook
In Yarnbrook, that means homes near Church of Holy Trinity, The Clarendon Academy and North Bradley CofE Primary School, among other places. Yarnbrook’s nearest station is Westbury station, roughly 1.9 miles south of the centre. Well-known places in the area include Trowbridge Castle (2 miles north-west) and West Wiltshire (2 miles north-west).
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs straight away
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we’re called out for in Yarnbrook
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
Most people contact us after spotting something like this:
- Brown or grey marks that don’t clean off
- Chips and rust in more than one place
- An old resurfacing that’s failing
- Enamel that’s lost its shine and feels rough
Before booking anyone
- How the colour is matched
- What happens if the damage is worse than the pictures show
- If travel is included in the price
- How your room will be protected
Landlords, agents and businesses in Yarnbrook
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Yarnbrook. The price reflects:
- How many areas need work
- How hard the colour is to match
- Doing more than one item at once
- The material
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- Where you are, by postcode
- Any details about the material
- Daylight if possible, and no flash reflection
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Repair or replace in Yarnbrook?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
What you get with us
- One-year guarantee on every repair
- We leave the room as we found it
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
Take a look at our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
