Worcestershire · England

Bath re-enamelling & resurfacing in Dunhampton, Worcestershire

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Dunhampton. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Dunhampton

Where we work around Dunhampton

Dunhampton is about 4 miles north-west of Droitwich Spa, in Worcestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 376 towns and villages in Worcestershire. You can also see our page for Birmingham, about 19 miles away.

Our visits in DY13 work the same way as everywhere else we cover. That includes homes on Doverdale Lane, Halfway Lane and Owlhill Lane. Nearby, we also work in Sytchampton (1 mile south), Owlhill (1 mile west), Northampton (1 mile south-west), Oldfield (1 mile south) and Lineholt (1 mile west). Within a short drive, we also cover Worcester (7 miles south), Redditch (12 miles east), Kidderminster (6 miles north), Bromsgrove (7 miles east), Great Malvern (13 miles south) and Droitwich Spa (4 miles south-east).

Local landmarks in Dunhampton

Around Dunhampton, we work in homes near Church of St Mary and Sytchampton Endowed Primary School, among other places. Dunhampton’s nearest station is Hartlebury station, roughly 2.6 miles north. Nearby you’ll also find Elmley Lovett (2.1 miles north-east). Not far away are Wilden Marsh.

Map of Dunhampton © OpenStreetMap contributors

Bath re-enamelling in Dunhampton, done in place

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair basins & shower trays, acrylic baths and cast iron baths, and the jobs we see most are a bath in a colour that no longer suits and an original cast iron bath that needs restoring.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Location
Dunhampton (DY13)
County
Worcestershire
Cover
One year on every repair
Quote
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What we cannot put right

Some jobs are not right for a repair, for example:

  • Steel that has corroded right through
  • A poorly supported acrylic bath, until it’s firmed up
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send pictures and we will say what we think before booking.

Materials we repair

  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays

Aftercare tips

How the surface is treated afterwards matters:

  • A dripping tap should be fixed promptly
  • Get any chip repaired quickly
  • Respect the curing time we give you
  • Don’t let dyes or oils sit on the finish

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

The process

Arrival times are agreed in advance. Once we are there, the work takes most of the day for most jobs. We leave the room clean.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Tell us if there are stairs or a lift
  • Avoid using the area for a few hours before we arrive

Ask for a price

If you’re in Dunhampton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Advice

Landlords, agents and businesses in Dunhampton

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Repair or replace in Dunhampton?

If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • A year’s guarantee on all work
  • Everything repaired in place
  • No extra charge for your area
  • Most jobs done in one visit

Read our full price list or resurfacing vs replacement cost guide.

FAQs for Dunhampton

How quickly can you book me in?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room masked and ventilated.

How long does re-enamelling take?

Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Do you resurface freestanding baths?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and we will quote them together.

Do you work in Dunhampton?

Yes, we do. We send a technician to Dunhampton for every job, with no extra charge for travel.

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before and we’ll plan for it.

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.

What we are called out for in Dunhampton

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

People normally call us after spotting something like this:

  • A coating lifting around the plughole
  • A bath in a colour that no longer suits
  • A dull, rough surface that won’t come clean
  • Stains that will not shift

Questions to ask before you book

  • The length of the guarantee and what it covers
  • What aftercare is recommended
  • What preparation is included
  • Whether the colour is mixed to match

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.