Worcestershire · England
Bath Re-enamelling in Lineholt
Problem with your bath in Lineholt? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Several chips and rust patches
- Wear marks under the taps
How we handle bath re-enamelling in Lineholt
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our technicians work on basins & shower trays, cast iron baths and Victorian roll-tops, and the jobs we see most are brown or grey marks that don’t clean off and worn patches where water runs and sits.
Every job is backed for twelve months in Lineholt and everywhere else. If something goes wrong with the work, we come back.
- Where
- Lineholt (WR9)
- Region
- Worcestershire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Lineholt
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- How easy the damage is to reach
- The type of damage
- How much damage there is
- Doing more than one item at once
Our prices are the same across the UK, with no extra for Lineholt. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Before you send photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
To get a price, send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
How to look after the repair
Once the work has cured, treat it gently:
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs immediately
- Get any chip repaired quickly
- Do not use the bath until it has fully cured
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
When to call us in Lineholt
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
People usually call us after spotting one of these:
- Wear marks under the taps
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
- Several chips and rust patches
What your quote should include
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- How to look after the finish
- Whether they match the colour on site
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Colour mixed on the day to match
- Every repair guaranteed for a year
- A fixed quote before you book
- Same prices wherever you are
Read our prices page or guide to resurfacing and replacement costs.
Questions from Lineholt
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes the best part of a day. We clean up when we’re done and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the next day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
- Let us know about parking or access
Getting a price
Upload photos of the damage and one of the entire item, and tell us you are in Lineholt, and we will come back with a fixed quote.
Advice
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
More services for Lineholt
About Lineholt
Lineholt is about 3 miles south-east of Stourport-on-Severn, in Worcestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 376 places across Worcestershire, from the larger towns to small villages. We work right across the region, from Lineholt to Birmingham (about 19 miles away).
Our technicians cover all of WR9 and the streets around it. Whether you live on Bishops Wood Road and Lineholt Lane or a nearby road, a technician can come to you. Nearby, we also work in Owlhill (1 mile east), Northampton (1 mile south-east), Dunhampton (1 mile east), Sytchampton (1 mile south-east) and Oldfield (1 mile south-east). Larger places within reach include Worcester (7 miles south), Redditch (13 miles east), Kidderminster (6 miles north), Bromsgrove (8 miles east), Great Malvern (13 miles south) and Droitwich Spa (5 miles south-east).
Local landmarks in Lineholt
Around Lineholt, we work in homes near Sytchampton Endowed Primary School. Lineholt’s nearest station is Hartlebury station, roughly 2.7 miles north-east of the centre. Nearby you’ll also find Olivers Mound Castle (1.4 miles south-west). Green spaces nearby include Wilden Marsh and Abberley Hill.
About our accreditations · Every repair comes with a one-year guarantee.
