Medway · England
Bath re-enamelling & resurfacing in Dunn Street, Medway
Problem with your bath in Dunn Street? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Chips and rust in more than one place
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How we handle bath re-enamelling in Dunn Street
The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the day after. Typical jobs include several chips and rust patches and enamel that’s lost its shine and feels rough, across basins & shower trays, acrylic baths and cast iron baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Dunn Street (ME7)
- Area hub
- Medway
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Dunn Street
More services for Dunn Street
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
When a repair is not the answer
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
Send us photos and we will tell you honestly before booking.
Materials we work on in Dunn Street
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
What we do, step by step
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Keeping it looking good
So the finish stays in good condition for years:
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
- Have chips seen to early
- Don’t leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Landlords, agents and businesses in Dunn Street
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Covering Dunn Street
Dunn Street is about 3 miles south-east of Chatham, in Medway. We visit homes and businesses in Dunn Street and nearby villages, so there is no workshop to go to. Our technicians cover 68 places in Medway. Our jobs stretch from Dunn Street to London (about 31 miles away).
Jobs in ME7 are booked in the same way as anywhere else. Other places close to Dunn Street include Lidsing (1 mile north-west), Bredhurst (1 mile north-east), Scragged Oak (1 mile south-east), Kemsley Street (1 mile north-east) and Lower Cox Street (1 mile south-east). We also work in nearby towns such as Gillingham (3 miles north), Chatham (3 miles north-west), Rochester (5 miles north-west), Rainham (3 miles north-east), Strood (6 miles north-west) and Luton (3 miles north-west).
Near you in Dunn Street
Typical jobs here are in homes near Church of St Peter, Swingate Primary School and The Harrow pub and the streets around them. The nearest railway station is Rainham (Kent) station, roughly 3.3 miles north-east. A little further out are KIMS hospital (2.8 miles south) and Allington Castle (3.4 miles south-west). The countryside around Dunn Street includes Boxley Hills and Burham Down.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Access to the area
- Whether we combine several jobs
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Quotes from your photos
Phone pictures are fine, there is no need for anything special. Just ensure we can see:
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Any details about the material
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Dunn Street: your questions answered
How do I get a price for bath re-enamelling in Dunn Street?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What areas do you cover?
Across the UK, so Dunn Street is covered. Our prices are the same everywhere.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you need bath re-enamelling in Dunn Street?
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
If you can see any of these, send us a picture:
- An outdated colour you’d like to change
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- A roll-top that’s seen better days
Before booking anyone
- How changes to the job are handled
- Aftercare advice
- Is the price fixed, and does it include VAT?
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
