Kent · England
Bath Re-enamelling in Lower Cox Street
Damaged bath in Lower Cox Street? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Lots of chips and rust spots
Our work in Lower Cox Street
Lower Cox Street is about 4 miles south of Gillingham, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 922 places in Kent, from the larger towns to small villages. You can also see our page for London, about 32 miles away.
Here we cover the ME14 postcode area. We also cover the places around Lower Cox Street: Scragged Oak (1 mile north-west), Kemsley Street (1 mile north-west), Bredhurst (1 mile north-west), Dunn Street (1 mile north-west) and Lidsing (2 miles north-west). Further out, we also cover Maidstone (5 miles south-west), Sittingbourne (6 miles east), Gravesend (12 miles north-west), Faversham (13 miles east), Northfleet (13 miles north-west) and Minster (11 miles north-east).
Local landmarks in Lower Cox Street
In Lower Cox Street, that means homes near Church of St Peter and White Horse Wood. The nearest railway station is Bearsted station, about 3.1 miles south. Further afield, we also cover the area around Allington Castle (4.1 miles south-west) and KIMS hospital (2.8 miles south-west). Green spaces nearby include Burham Down and Detling Hill.
Bath re-enamelling in Lower Cox Street, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you are dealing with thin, worn enamel in places and chips and rust in more than one place, we can normally put it right, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Lower Cox Street (ME14)
- Region
- Kent
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Also near Lower Cox Street
Other services in Lower Cox Street
Honest limits
To be straight with you, there are a few things a repair will not fix:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Do you need bath re-enamelling in Lower Cox Street?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Get in touch if you’ve noticed any of these:
- Wear marks under the taps
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
Questions to ask before you book
- How soon you can use it again
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- How long the guarantee is and what it covers
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Lower Cox Street questions
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote with dates.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Advice
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Respect the curing time we give you
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- The type of damage
- Any earlier repairs that need removing first
- The material and finish
- Unusual colours or finishes
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed price
When you take your pictures, a few simple things make all the difference:
- Any details about the material
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
