Doncaster · England
Bath re-enamelling & resurfacing in Dunsville, Doncaster
Local bath re-enamelling for Dunsville: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Lots of chips and rust spots
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How we handle bath re-enamelling in Dunsville
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include staining under the taps and around the waste and worn patches where water runs and sits, in pressed steel baths, acrylic baths and basins & shower trays.
All of our repairs are guaranteed for twelve months in Dunsville and everywhere else. We return to put right any problem with the work.
- Area
- Dunsville (DN7)
- Region
- Doncaster
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Dunsville
More services for Dunsville
Covering Dunsville
Dunsville is about 4 miles south-west of Thorne, in Doncaster. From the centre of Dunsville to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Dunsville is one of 89 towns and villages in Doncaster where we work. Our nearest city page is Leeds, about 27 miles away.
We cover every part of DN7. That includes homes on High Street, Kempton Drive and St Mary's Road and the roads around them. Other places close to Dunsville include Dunscroft (1 mile north-east), Hatfield (2 miles north-east), Kirk Sandall (2 miles west), Edenthorpe (2 miles west) and Barnby Dun (2 miles north-west). Within a short drive, we also cover Doncaster (5 miles south-west), Adwick le Street (7 miles west), Thorne (4 miles north-east), Conisbrough (10 miles south-west), Bentley (5 miles west) and New Rossington (6 miles south).
Around Dunsville
Locally, our jobs take us to homes close to St Edwin, Ash Hill Academy and Dunsville Primary School. The nearest railway station is Hatfield & Stainforth station, roughly 1.7 miles north. A little further out are Doncaster Royal Infirmary (4 miles south-west). The countryside around Dunsville includes Thorpe Marsh Nature Reserve.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Same prices wherever you are
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
See our full price list and guide to resurfacing and replacement costs.
Signs you need bath re-enamelling in Dunsville
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Keep an eye out for these signs:
- Wear marks under the taps
- An outdated colour you’d like to change
- A coating lifting around the plughole
- A roll-top that is seen better days
Before booking anyone
- Is the price fixed, and does it include VAT?
- What preparation is included
- If travel is included in the price
- How the room is protected while they work
FAQs for Dunsville
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What happens after I send pictures?
We come back with a fixed price. You’re under no obligation.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
How the visit works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Advice
Keeping it looking good
Simple care helps the repair last. Our advice:
- Keep suction mats out of the bath
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Honest limits
We will not take on work that won’t last, so these are the limits:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly.
What we work on
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Landlord and trade work in Dunsville
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How many areas need work
- Previous DIY repairs that have to come out
- The material
- Unusual colours or finishes
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed price
Good photos mean an accurate price. Here’s what helps:
- Natural light rather than flash
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- The material, if you know it
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
