Gloucestershire · England
Bath Re-enamelling in Duntisbourne Abbots
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Duntisbourne Abbots. Send photos for a free, fixed quote.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
Our work in Duntisbourne Abbots
Duntisbourne Abbots is about 5 miles north-west of Cirencester, in Gloucestershire. Clients in Duntisbourne Abbots get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. We work in all 470 towns and villages in Gloucestershire. Our nearest city page is Birmingham, about 49 miles away.
Jobs in GL7 are booked in the same way as anywhere else. Close by, we cover Duntisbourne Leer (1 mile south-east), Middle Duntisbourne (1 mile south-east), Winstone (1 mile north-west), Edgeworth (2 miles south-west) and Woodmancote (2 miles east). Further out, we also cover Cheltenham (9 miles north), Gloucester (10 miles north-west), Stroud (8 miles west), St Paul's (9 miles north), Cirencester (5 miles south-east) and Lansdown (9 miles north).
What’s near Duntisbourne Abbots
Typical jobs here are in homes near Church of St Peter and Five Mile House and the streets around them. Further afield, we also cover the area around Miserden Castle (1.9 miles north-west) and Cirencester Hospital (4.9 miles south-east). Green spaces nearby include Siccaridge Wood and Cotswolds.
Bath re-enamelling at your home in Duntisbourne Abbots
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for chips and rust in more than one place and an original cast iron bath that needs restoring, in cast iron baths, Victorian roll-tops and acrylic baths.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Duntisbourne Abbots (GL7)
- County
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Also near Duntisbourne Abbots
What else we do in Duntisbourne Abbots
Aftercare tips
To keep it looking its best:
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs straight away
- A dripping tap should be fixed promptly
- Do not leave bottles, razors or sponges standing on the surface
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Signs you need bath re-enamelling in Duntisbourne Abbots
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Look out for these signs:
- Brown or grey marks that do not clean off
- A roll-top that’s seen better days
- A coloured bath you want in white
- Chips and rust in more than one place
Before booking anyone
- How long the guarantee is and what it covers
- Who turns up on the day
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
Duntisbourne Abbots: your questions answered
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
How do I get a price for bath re-enamelling in Duntisbourne Abbots?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item with your GL7 postcode.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How long is the bath unusable?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
How it works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes most of the day for most jobs. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Open a window if you can
Ask for a price
To get a price, send two or three pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.
Read more
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Access to the area
- The material and finish
- Whether old repairs or coatings need taking off
- How many items we do on one visit
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- Details of any past repairs
- A picture taken from further back
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- A cast iron or steel bath that is cracked right through
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
For landlords and businesses
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
