Gloucestershire · England

Bath re-enamelling & resurfacing in Winstone, Gloucestershire

We travel to Winstone for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Winstone

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Bath re-enamelling in Winstone, done in place

We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Typical jobs include a period or roll-top bath worth keeping and a peeling or bubbling previous coating, on cast iron baths, Victorian roll-tops and pressed steel baths.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.

Roll-top bath being refinished by a Surface Doctor technician
Where
Winstone (GL7)
Area hub
Gloucestershire
Warranty
A year, on every repair
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

When a repair is not the answer

Before booking, it’s worth knowing the limits:

  • A metal bath with a through crack
  • Holes rusted through the metal
  • Anything hidden under an old coating, until we remove it

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths

What we are called out for in Winstone

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

Signs it’s time to call us include:

  • A peeling or bubbling previous coating
  • Several chips and rust patches
  • A coloured bath you want in white
  • A period or roll-top bath worth keeping

Comparing quotes

  • How soon you can use it again
  • What aftercare is recommended
  • How the room is protected while they work
  • How long the guarantee is and what it covers

Choosing a repair company

For landlords and businesses

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.

What happens on the day

Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. It normally takes most of the day, and we will keep you posted as we go.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Avoid using the area for a few hours before we arrive
  • Keep pets and children out of the room while we work

Ask for a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you’re under no obligation.

Send photos for a quote

Read more

Where we work around Winstone

Winstone is about 6 miles south-east of Brockworth, in Gloucestershire. Whether you are in the middle of Winstone or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Winstone is one of 470 places in Gloucestershire we cover. You can also see our page for Birmingham, about 48 miles away.

Here we cover the GL7 postcode area. We regularly work on streets such as Back Lane, Jackbarrow Road and School Hill and the roads around them. We also travel to Duntisbourne Abbots (1 mile south-east), Duntisbourne Leer (2 miles south-east), Middle Duntisbourne (2 miles south-east), Edgeworth (2 miles south-west) and Woodmancote (3 miles east). Within a short drive, we also cover Cheltenham (8 miles north), Gloucester (9 miles north-west), Stroud (8 miles west), Tewkesbury (15 miles north), St Paul's (8 miles north) and Cirencester (6 miles south-east).

Near you in Winstone

In Winstone, that means homes near Church of St Bartholomew and the streets around them. Further afield, we also cover the area around Miserden Castle (1.1 miles west). For a walk, there’s Siccaridge Wood and Cotswolds.

Map of Winstone © OpenStreetMap contributors

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Aftercare tips

Most damage we see is avoidable. These habits help:

  • Avoid suction-cup mats
  • Don’t let dyes or oils sit on the finish
  • Do not use the bath until it has fully cured
  • Do not leave bottles, razors or sponges standing on the surface

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Do not try to scrub a worn bath back to shine. It just wears the enamel further.

Winstone: your questions answered

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

Can you quote from photos?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Is it worth repairing rather than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Are there extra charges for Winstone?

We do not add a call-out fee. The fixed price covers the visit and the work.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.

What bath re-enamelling costs

Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:

  • The material and finish
  • Where the damage is and how we get to it
  • Whether we combine several jobs
  • Whether it’s a chip, crack, burn or wear

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Quotes from your photos

You can take the pictures on your phone, there’s no need for anything special. Make sure they show:

  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • One sharp close-up of the damage
  • Details of any past repairs

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.