Cambridgeshire · England
Bath re-enamelling & resurfacing in Earith, Cambridgeshire
Full bath re-enamelling and resurfacing in Earith, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Wear marks under the taps
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Earith. The price comes down to:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- How much damage there is
- How hard the colour is to match
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Phone pictures are fine. Just ensure we can see:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Bath re-enamelling in Earith, done in place
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. If you are dealing with an old resurfacing that’s failing and enamel that’s lost its shine and feels rough, we can help, whatever the material.
All our work comes with a one-year guarantee.
- Location
- Earith (PE28)
- Region
- Cambridgeshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Earith
What else we do in Earith
Earith questions
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Earith.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair cannot fix:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Don’t use the bath until it has fully cured
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Where we work around Earith
Earith is about 5 miles east of St Ives, in Cambridgeshire. Our repair technicians come to clients in Earith, so nothing has to leave your home. Earith is one of 371 towns and villages in Cambridgeshire we cover. We work right across the region, from Earith to London (about 59 miles away).
All of PE28 is covered. We regularly work on streets such as High Street, School Road and Edwards Walk. Main roads around Earith include the B1050, which makes travel easy. If you are just outside Earith, we cover Colne (1 mile north-west), Bluntisham (1 mile west), Somersham (2 miles north-west), Over (3 miles south) and Needingworth (3 miles south-west). Further out, we also cover Cambridge (11 miles south), Huntingdon (9 miles west), St Ives (5 miles west), Ely (10 miles east), March (14 miles north) and Cambourne (11 miles south-west).
Around Earith
Around Earith, we work in homes near The Crown pub, Parish Church of St Mary and Earith Primary School. Nearby you will also find Castle Hill earthworks (4.1 miles south-west). The countryside around Earith includes Fen Drayton Lakes.
Common problems we fix in Earith
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Common reasons people in Earith contact us include:
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- Stains that will not shift
- Lots of chips and rust spots
What your quote should include
- A fixed price, and whether VAT is included
- What aftercare is recommended
- What the guarantee covers, and for how long
- Who will actually do the work
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow the best part of a day. Before we go, we’ll explain how long to leave it and how to look after it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
How to prepare
- Open a window if you can
- Let us know about parking or access
- Clear the area around the damage
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
