Sheffield · England
Bath re-enamelling & resurfacing in Eastfield, Sheffield
Our technicians come to Eastfield for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- Lots of chips and rust spots
Bath re-enamelling in Eastfield, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Our repair technicians work on pressed steel baths, basins & shower trays and cast iron baths, and the jobs we see most are chips and rust in more than one place and a peeling or bubbling previous coating.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Area
- Eastfield (S35)
- County
- Sheffield
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Eastfield
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Are there extra charges for Eastfield?
Travel is included in the price, with the same prices everywhere we work.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Where we work around Eastfield
Eastfield is about 4 miles south-west of Barnsley, in Sheffield. Anywhere in S35, a technician comes to you. Eastfield is one of 118 towns and villages in Sheffield where we work. You can also see our page for Leeds, about 20 miles away.
All of S35 is within our area, from the main roads to the quietest streets. Streets in the area include Eastfield Lane and Eastfield Place, and we cover them all. If you’re just outside Eastfield, we cover Crane Moor (1 mile south-east), Hood Green (1 mile east), Silkstone Common (1 mile north), Thurgoland (1 mile south) and Kine Moor (2 miles north-west). Within a short drive, we also cover Sheffield (11 miles south), Netherthorpe (10 miles south), Upperthorpe (9 miles south), West End (10 miles south), Walkley (9 miles south) and Broomhall (10 miles south).
Landmarks near Eastfield
Around Eastfield, we work in homes near Silkstone Common Junior and Infant School and Holy Trinity Church, among other places. The closest station to Eastfield is Silkstone Common station, roughly 1.1 miles north. Well-known places in the area include Alhambra Shopping Centre (3.8 miles north-east) and Worsbrough Mill Museum (3.4 miles east). Open spaces near Eastfield include Carr House Meadows.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes most of the day, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Let the surface dry out before the visit
- Have a window or extractor fan available
Get a quote
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
When we’d advise against a repair
In fairness, some problems need a different fix:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Aftercare tips
How the surface is treated afterwards matters:
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
- Don’t leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What bath re-enamelling costs
Prices start from £350. We price every job individually. The main factors are:
- How many items we do on one visit
- The colour and finish to match
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
It only takes a minute to photograph the damage. Try to send:
- A wider photo showing the whole bath
- Any earlier repairs or coatings
- Natural light rather than flash
- The postcode, so we can plan the visit
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Nearby places to Eastfield
Also in Eastfield
Signs you need bath re-enamelling in Eastfield
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Common reasons people in Eastfield contact us include:
- An original cast iron bath that needs restoring
- Wear marks under the taps
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Comparing quotes
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- What prep work is covered
- What happens if they find more damage
Repair or replace in Eastfield?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Nothing taken out or refitted
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
Read our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
