Barnsley · England
Bath re-enamelling & resurfacing in Kine Moor, Barnsley
Bath re-enamelling across Kine Moor and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it

Bath re-enamelling at your home in Kine Moor
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for several chips and rust patches and worn patches where water runs and sits, across acrylic baths, Victorian roll-tops and cast iron baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.

- Location
- Kine Moor (S75, S36)
- Region
- Barnsley
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
So the finish stays in good condition for years:
- Do not leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Wash away dyes and oils after use
- Repair dripping taps early
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Work for landlords and builders
Landlords, letting agents and housing providers in Kine Moor use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Kine Moor and nearby
Kine Moor is about 2 miles north-east of Penistone, in Barnsley. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Kine Moor is one of 94 towns and villages in Barnsley where we work. Our jobs stretch from Kine Moor to Leeds (19 miles away).
Postcode districts we cover here: S75 and S36. From Barnsley Road and Kine Moor Lane or a nearby road, a technician can come to you. We also cover the places around Kine Moor: Noblethorpe (1 mile north-east), Silkstone Common (1 mile east), Silkstone (1 mile north-east), Oxspring (2 miles south-west) and Eastfield (2 miles south-east). Larger places within reach include Barnsley (4 miles east), Wombwell (8 miles east), Wath upon Dearne (10 miles east), Shaw Lands (4 miles east), Hoyland (6 miles south-east) and Worsbrough (5 miles east).
Near you in Kine Moor
Typical jobs here are in homes near Church of All Saints, Silkstone Primary School and Penistone Grammar School and the streets around them. For rail, the closest station is Silkstone Common station, roughly 0.8 miles east of the centre. Well-known places in the area include Victoria Jubilee Museum (2.2 miles north) and Barnsley Hospital (3.7 miles north-east).
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Kine Moor. The price reflects:
- How hard the colour is to match
- The material
- How many items we do on one visit
- The size and number of damaged areas
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- Details of any past repairs
- Your postcode, so we can check dates
- Something in shot to show the size
- Daylight if possible, and no flash reflection
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.
What we can’t put right
Before you book, it’s worth knowing the limits too:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Questions from Kine Moor
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
The process
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
How to get a price
Email us a photo of the damage and a wider shot of the entire item, with your S75 postcode, and we will come back with a fixed quote.
Related advice
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Do you need bath re-enamelling in Kine Moor?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
People generally call us after spotting one of these:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Several chips and rust patches
Comparing quotes
- How the room is protected while they work
- The length of the guarantee and what it covers
- How long it needs to cure
- What happens if the damage is worse than the photos show
Places near Kine Moor
Other services in Kine Moor
About our accreditations · Every repair comes with a one-year guarantee.

