Lincolnshire · England
Bath & shower resealing (mastic) in Eaton, Lincolnshire
Bath, shower and sink resealing with new mould-resistant silicone in Eaton, carried out at your home and guaranteed for a year.
- Gaps in the seal
- Stained silicone
- An untidy old seal
Eaton questions
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you cover the whole of Lincolnshire?
We work UK-wide. Our prices are the same everywhere.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can new silicone go over old?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Do you charge for travel?
There’s no separate call-out charge. The fixed price covers the visit and the work.
How long does silicone take to cure?
Typically after around 24 hours. We confirm before we leave.
Bath resealing in Eaton without replacing anything
We cut out all of the old sealant, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. If you are dealing with sealant that’s split or lifting and water getting behind the bath or tray, we can normally put it right, on wet rooms, kitchen worktops & sinks and basins & vanity units alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Eaton (NG32)
- Area hub
- Lincolnshire
- Cover
- A year, on every repair
- Price
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- Gaps too big for silicone alone
- Rotten walls or floors behind the bath
- A bath or tray that moves, until its support is fixed
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
- Wet rooms
Different materials, different repairs
Baths
Baths are resealed with water in them, to open the joint fully.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
What else we do in Eaton
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for around two hours from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Before we arrive
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
What bath resealing costs
A fixed quote means you know the cost before booking. We take into account:
- Any earlier repairs that need removing first
- The type of damage
- What the surface is made of
- How much damage there is
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- One picture of the whole bath or shower
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Resealing in Eaton: why it matters
Resealing is a small job. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
Read our pricing.
Our work in Eaton
Eaton is about 7 miles north-east of Melton Mowbray, in Lincolnshire. Whether you are in the middle of Eaton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Eaton is one of 732 places in Lincolnshire where we work. Our nearest city page is Birmingham, about 52 miles away.
Jobs in NG32 are booked in the same way as anywhere else. Whether you live on Main Street, Church Lane and Chapel Street or anywhere nearby, we can come to you. We also cover the places around Eaton: Eastwell (1 mile west), Goadby Marwood (2 miles south-west), Stathern (2 miles north-west), Waltham on the Wolds (3 miles south) and Wycomb (3 miles south-west). Larger places within reach include Grantham (8 miles north-east), Spittlegate (8 miles north-east), Gonerby Hill Foot (8 miles north-east), Earlesfield (7 miles north-east), Great Gonerby (9 miles north-east) and Manthorpe (9 miles north-east).
What’s near Eaton
In Eaton, that means homes near Church of St Denys and Castle Inn, among other places. Well-known places in the area include Belvoir Castle (3.2 miles north-east).
How to care for the repair
So the finish stays in good condition for years:
- Replace the seal when mould sets in
- Ventilate the bathroom well
- Give the seal a regular clean
- Let steam out after showers
Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
