Sheffield · England
Bath Re-enamelling for Ecclesall homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Ecclesall. Free, fixed quotes from your photos.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Common questions in Ecclesall
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Ecclesall.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Bath re-enamelling in Ecclesall without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We’re often asked to fix stains that won’t shift and an outdated colour you’d like to change, across basins & shower trays, cast iron baths and acrylic baths.
All our work is covered by our one-year guarantee.
- Where
- Ecclesall (S11, S7)
- Region
- Sheffield
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Ecclesall
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Ecclesall, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Ecclesall and the surrounding area
Ecclesall is about 2 miles south-west of Sheffield, in Sheffield. Our technicians come to clients in Ecclesall and the surrounding area, so there is no workshop to go to. Ecclesall is one of 118 places in Sheffield we cover. You can also see our page for Manchester, about 30 miles away.
Our visits in S11 and S7 are booked in the same way as anywhere else. Whether you live on Ford Road, Haugh Lane and Mylor Road or anywhere nearby, a technician can come to you. Ecclesall sits on or near the A625, so getting to you is simple. Close by, we cover Brincliffe (1 mile north-east), Whirlow (1 mile south-west), Ranmoor (1 mile north-west), Fulwood (1 mile north-west) and Broomhill (2 miles north). We also work in nearby towns such as Upperthorpe (3 miles north-east), Walkley (3 miles north), Chapeltown (7 miles north), Neepsend (3 miles north-east), Malin Bridge (3 miles north) and Cathedral Quarter (3 miles north-east).
Local landmarks in Ecclesall
In Ecclesall, that means homes near Chelsea Park, Ecclesall Primary School and High Storrs School. Other local landmarks include Tapton Mount School (1.5 miles north), All Saints Church (within half a mile north) and Union Hotel and adjoining boundary wall (0.9 miles north-east). Ecclesall’s nearest station is Dore & Totley station, roughly 2 miles south. Further afield, we also cover the area around Nether Edge Hospital (0.7 miles north-east) and Ecclesall Bierlow (under half a mile north-east). Not far away are Fox Hagg and Burbage Rocks.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Do not leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Repair dripping taps early
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Also near Ecclesall
Other services in Ecclesall
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why Ecclesall customers choose us
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
- Work done at your home or business
See our prices page and bath cost comparison.
What we cannot put right
A repair isn’t right for every job, for example:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- The material and finish
- Where the damage is and how we get to it
- How hard the colour is to match
We charge the same wherever you are, so there is no premium for Ecclesall. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Something in shot to show the size
- Details of any past repairs
- One sharp close-up of the damage
- A picture taken from further back
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
How the visit works
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. You can expect it to take most of the day, and we will keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Open a window if you can
How to get a price
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll say straight away if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
