Stockport · England
Bath re-enamelling & resurfacing in Edgeley, Stockport
Full bath re-enamelling and resurfacing in Edgeley, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Stains that won’t shift
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Bath re-enamelling at your home in Edgeley
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. If you are dealing with thin, worn enamel in places and a bath that stays dull however much you clean it, we can generally put it right, whatever the material.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Edgeley (SK3, SK1, SK2)
- Region
- Stockport
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Covering Edgeley
Edgeley is about 1 mile south-west of Stockport, in Stockport. From the centre of Edgeley to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 42 towns and villages across Stockport. We work right across the region, from Edgeley to Manchester (about 6 miles away).
Our visits in SK3, SK1 and SK2 work the same way as everywhere else we cover. That includes homes on Doris Road, Eldon Road and Clyde Road. We also travel to Adswood (1 mile south), Cheadle Heath (1 mile west), Davenport (1 mile south-east), Woodsmoor (1 mile south-east) and Offerton (2 miles east). Within a short drive, we also cover Hazel Grove (3 miles south-east), Reddish (3 miles north), Marple (4 miles east), Bredbury (3 miles north-east), Romiley (4 miles east) and Gatley (3 miles west). As one of the bigger places in Stockport, Edgeley sees plenty of our work.
Around Edgeley
In Edgeley, that means homes near Alexandra Hotel, Alexandra Park Primary School and Stockport Academy, among other places. Nearby too are Hillcrest Grammar School (0.7 miles east) and St Matthew's Church (under half a mile north). The closest station to Edgeley is Stockport station, about 0.6 miles north-east of the centre. Well-known places in the area include Alexandra Hospital (1.8 miles west) and Stockport Rural District (2.4 miles east). Green spaces nearby include Unicorn Grocery.
What we can’t put right
Before you book, it’s worth knowing the limits too:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- Whether old repairs or coatings need taking off
- The material
- Doing more than one item at once
- How many areas need work
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- The material, if you know it
- A wider photo showing the entire bath
Upload a picture of the damage and a wider shot of the whole item, with your SK3 postcode, and we’ll come back with a fixed quote.
Also near Edgeley
Also in Edgeley
Common questions in Edgeley
Are there extra charges for Edgeley?
Travel is included in the price, and we charge the same wherever you are.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Can you fix a peeling bath coating?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Repairing versus replacing in Edgeley
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- One price list for the entire UK
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- Colour mixed on the day to match
Read our full price list and resurfacing vs replacement cost guide.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
What we do, step by step
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It typically takes a full day, and you’re welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
