Stockport · England
Bath re-enamelling & resurfacing in Woodsmoor, Stockport
Our repair technicians come to Woodsmoor for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Worn patches where water runs and sits
- A roll-top that’s seen better days
Bath re-enamelling in Woodsmoor without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Whether it’s a bath in a colour that no longer suits and a peeling or bubbling previous coating, we can normally put it right.
You get a one-year guarantee, the same in Woodsmoor as everywhere else we work.
- Where
- Woodsmoor (SK2, SK7, SK3)
- County
- Stockport
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Woodsmoor
Woodsmoor is about 1 mile south-east of Stockport, in Stockport. Anywhere in SK2, a technician comes to you. Our technicians cover 42 places across Stockport. Our jobs stretch from Woodsmoor to Manchester (7 miles away).
Jobs in SK2, SK7 and SK3 are booked in the same way as anywhere else. Streets in the area include Cedar Road, Buxton Road and Corbar Road, all of which we cover. Being close to the A5102, Woodsmoor is easy for our repair technicians to reach. Nearby, we also work in Davenport (1 mile west), Offerton (1 mile north-east), Foggbrook (1 mile east), Hazel Grove (1 mile south-east) and Adswood (1 mile west). Further out, we also cover Burnage (4 miles north-west), Reddish (4 miles north), Cheadle (3 miles west), Marple (3 miles east), Bredbury (3 miles north-east) and Romiley (3 miles north-east).
Around Woodsmoor
Around Woodsmoor, we work in homes near Hillcrest Grammar School, St Saviour and Stockport School. There’s a railway station in Woodsmoor itself: Woodsmoor station. Further afield, we also cover the area around Hat Works (1.6 miles north-west) and Stepping Hill Hospital (0.6 miles east). Green spaces nearby include Werneth Low.
- Local facilities include Stockport Rural District (1.9 miles north-east)
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
How the visit works
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes the best part of a day in most cases. The room is left tidy and you’ll know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Point us to the nearest place to park
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Ask for a price
For a price in Woodsmoor, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
For landlords and businesses
We work for landlords, letting agents and housing providers in Woodsmoor as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Common questions in Woodsmoor
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do you cover Woodsmoor?
We do. We send a technician to Woodsmoor for every job, and the price is the same as everywhere else.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What areas do you cover?
Across the UK, and that includes Woodsmoor. Our prices are the same everywhere.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Do you need bath re-enamelling in Woodsmoor?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Signs it’s time to call us include:
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- A coating lifting around the plughole
- Staining under the taps and around the waste
What your quote should include
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the photos show
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Any earlier repairs that need removing first
- The type of damage
- Whether we combine several jobs
- The material
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Send pictures for a quote
Phone photos are fine. Just ensure we can see:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Where you are, by postcode
To get a price, send two or three photos using our quote form or ring us. We’ll say straight away whether it can be repaired.
Also in Woodsmoor
Repairing versus replacing in Woodsmoor
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Woodsmoor clients choose us
- Fixed prices from your photos
- One price list for the entire UK
- Typically one visit, start to finish
- Honest advice, even when it means no job
Take a look at our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
