Kent · England
Bath re-enamelling & resurfacing in Egerton, Kent
Bath re-enamelling in Egerton without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Several chips and rust patches
How we handle bath re-enamelling in Egerton
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s a coating lifting around the plughole and a dull, rough surface that won’t come clean, we can help.
All of our repairs are guaranteed for twelve months in Egerton and everywhere else. If something goes wrong with the work, we come back.
- Area
- Egerton (TN27)
- Area hub
- Kent
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details.
For anyone letting property in or around Egerton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Places near Egerton
Also in Egerton
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
Send us photos and we will tell you honestly before booking.
Materials we work on in Egerton
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Our work in Egerton
Egerton is about 7 miles north-west of Ashford, in Kent. Customers in Egerton get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Egerton is one of 922 places in Kent we cover. Our jobs stretch from Egerton to London (41 miles away).
Jobs in TN27 work the same way as everywhere else we cover. That includes homes on The Street, Stevens Close and New Road. Neighbouring places we cover include Mundy Bois (1 mile south), Newland Green (1 mile south-west), Egerton Forstal (1 mile south-west), Pembles Cross (1 mile west) and Potter's Forstal (1 mile west). We also work in nearby towns such as Maidstone (10 miles north-west), Ashford (7 miles south-east), Sittingbourne (10 miles north), Faversham (11 miles north-east), Kings Hill (15 miles west) and Davington (11 miles north-east).
Local landmarks in Egerton
We visit homes around Egerton Church of England Primary School and Church of St James and the streets around them. Egerton’s nearest station is Pluckley station, about 2.7 miles south. Well-known places in the area include Coldbridge Castle (1.5 miles west).
Aftercare tips
Looking after the surface is easy:
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Don’t leave a chip unrepaired
- Respect the curing time we give you
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What affects the price in Egerton
Prices start from £350. We charge the same across the UK, including Egerton. What changes the price is:
- Doing more than one item at once
- The material
- Whether old repairs or coatings need taking off
- How many areas need work
The price reflects the work involved, not your postcode. You will see the full price before you book.
Quotes from your photos
Before you send photos, a few simple things make all the difference:
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- One sharp close-up of the damage
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
The process
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes most of the day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
Getting a price
Upload photos of the damage and a wider shot of the whole item, and tell us you are in Egerton, and we will come back with a fixed quote.
Read more
FAQs for Egerton
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Do you come to Egerton?
Yes. We work across the UK and travel to Egerton and the rest of Kent. Send photos and we will quote, or call 0345 017 0787.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Repair or replace in Egerton?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- A year’s guarantee on all work
- Honest advice, even when it means no job
- Work done at your home or business
- No extra charge for your area
Read our full price list and guide to resurfacing and replacement costs.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
