Nottinghamshire · England
Bath Re-enamelling in Egmanton
Bath re-enamelling across Egmanton and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole
Aftercare tips
So the finish stays in good condition for years:
- Rinse off hair dye, oils and bath bombs right away
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Bath re-enamelling in Egmanton, done in place
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Whether it’s an outdated colour you’d like to change and a dull, rough surface that won’t come clean, we can normally put it right, whatever the material.
Big or small, it’s backed by a one-year guarantee in Egmanton and across Nottinghamshire.
- Location
- Egmanton (NG22)
- Area hub
- Nottinghamshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Egmanton
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Egmanton, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Egmanton and the surrounding area
Egmanton is about 8 miles south of Retford, in Nottinghamshire. Our technicians come to homes and businesses in Egmanton and the surrounding area, so nothing has to leave your home. Egmanton is one of 329 places in Nottinghamshire we cover. You can also see our page for Leeds, about 49 miles away.
We work across the NG22 postcode area and the streets around it. From Kirton Road, Laxton Road and Weston Road or anywhere nearby, a technician can come to you. We also cover the places around Egmanton: West Markham (2 miles north), Kirton (3 miles west), Markham Moor (3 miles north), Milton (3 miles north-west) and Walesby (3 miles west). Larger places within reach include Mansfield (13 miles west), Worksop (12 miles north-west), Newark-on-Trent (10 miles south-east), Retford (8 miles north), Mansfield Woodhouse (12 miles west) and Forest Town (11 miles west).
Landmarks near Egmanton
In Egmanton, that means homes near Tuxford Academy and Church of Our Lady of Egmanton. Other landmarks nearby include The Museum of the Horse (1.4 miles north) and Laxton Castle (1.1 miles south-west).
Questions from Egmanton
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Do the materials smell?
Expect a mild smell while we are working.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know about parking or access
- Keep pets and children out of the room while we work
- Make sure the area is dry
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
What a repair cannot fix
Before booking, it’s worth knowing the limits too:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Repair or replace in Egmanton?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, with the bath back in use the next day. Our bath re-enamelling starts from £350. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Fixed prices from your photos
- One visit for most repairs
- Technicians who travel to you, UK-wide
- Honest advice, even when it means no job
See our pricing and bath cost comparison.
Do you need bath re-enamelling in Egmanton?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, generally first under the taps and around the waste.
Get in touch if you’ve noticed any of these:
- Worn patches where water runs and sits
- Chips and rust in more than one place
- A coating lifting around the plughole
- An outdated colour you’d like to change
Questions to ask before you book
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
- Who will actually do the work
- What prep work is covered
Places near Egmanton
More services for Egmanton
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Egmanton. The price reflects:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How much damage there is
- What the surface is made of
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
How to get a fixed quote
You can usually get a fixed quote without us visiting. To help us price it:
- Something in shot to show the size
- The postcode, so we can plan the visit
- One picture of the entire bath
- The material, if you know it
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
