Nottinghamshire · England
Bath re-enamelling & resurfacing in Kirton, Nottinghamshire
Full bath re-enamelling and resurfacing at your home in Kirton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
Bath re-enamelling at your home in Kirton
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for an outdated colour you’d like to change and stains that won’t shift, on cast iron baths, acrylic baths and Victorian roll-tops.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Kirton (NG22)
- County
- Nottinghamshire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
It helps to know what we cannot do too:
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think.
Materials we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
The process
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
Ask for a price
Most customers in Kirton get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Places near Kirton
Other services in Kirton
Looking after it afterwards
Once the work has cured, treat it gently:
- Don’t leave a chip unrepaired
- Wash away dyes and oils after use
- Respect the curing time we give you
- Fix dripping taps quickly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Kirton and nearby
Kirton is about 8 miles south of Retford, in Nottinghamshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 329 towns and villages in Nottinghamshire. Our jobs stretch from Kirton to Leeds (about 48 miles away).
We cover every part of NG22 and the streets around it. Whether you live on Main Street, Cocking Hill and Meden Road or anywhere nearby, a technician can come to you. Nearby, we also work in Boughton (1 mile north-west), Walesby (2 miles north), Egmanton (3 miles east), Haughton (3 miles north) and Bothamsall (3 miles north). Further out, we also cover Mansfield (10 miles south-west), Worksop (10 miles north-west), Sutton in Ashfield (13 miles south-west), Hucknall (15 miles south-west), Newark-on-Trent (11 miles south-east) and Retford (8 miles north).
Around Kirton
Our customers here include homes close to St Joseph's Catholic Primary and Nursery School, The Dukeries Academy and St Matthew's Church. Other landmarks nearby include Laxton Castle (2.1 miles east) and National Holocaust Centre and Museum (1 mile south-east). Not far away are Budby South Forest RSPB reserve.
Landlord and trade work in Kirton
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. What matters most is:
- The colour and finish to match
- The material and finish
- Access to the area
- Whether we combine several jobs
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Details of any past repairs
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Kirton: your questions answered
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Which areas do you work in?
We work UK-wide. Prices don’t change with location.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
Repair or replace in Kirton?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Most jobs done in one visit
- Colour-matched on site
- Everything repaired in place
- CHAS and Constructionline accredited
Read our full price list or resurfacing vs replacement cost guide.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
About our accreditations · Every repair comes with a one-year guarantee.
