Worcestershire · England

Bath Re-enamelling for Elcock's Brook homes

Bath re-enamelling in Elcock's Brook without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Resurfacing from £350
  • Wear marks under the taps
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Elcock's Brook

Honest limits

Some jobs aren’t right for a repair, for example:

  • A poorly supported acrylic bath, until it’s firmed up
  • A metal bath with a through crack
  • Problems we can’t see until an old finish comes off

Send us pictures and we will tell you honestly before booking.

Materials we repair

  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays

Bath re-enamelling in Elcock's Brook, done in place

The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Typical jobs include a bath in a colour that no longer suits and thin, worn enamel in places, on basins & shower trays, pressed steel baths and cast iron baths.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Before and after: an old basin refinished to bright white
Where
Elcock's Brook (B97)
County
Worcestershire
Guarantee
12 months on all our work
Price
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

What affects the price in Elcock's Brook

Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:

  • How easy the damage is to reach
  • The colour and finish to match
  • How many items we do on one visit
  • The material

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Quotes from your photos

We price nearly every job from photos. This is what we need:

  • The material, if you know it
  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection
  • A clear, close picture of the problem area

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

Common problems we fix in Elcock's Brook

Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

You may need us if you’ve spotted:

  • Wear marks under the taps
  • Chips and rust in more than one place
  • A bath that stays dull however much you clean it
  • A roll-top that is seen better days

Questions to ask before you book

  • Who will actually do the work
  • What protection goes down before work starts
  • Whether cleaning and preparation are in the price
  • Whether they match the colour on site

How to compare quotes

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • A dripping tap should be fixed promptly
  • Never use suction bath mats
  • Get any chip repaired quickly
  • Wash away dyes and oils after use

Wipe the bath dry after use where you can, and rinse away any product left on the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.

Covering Elcock's Brook

Elcock's Brook is about 3 miles south-west of Redditch, in Worcestershire. Jobs in Elcock's Brook are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 376 places across Worcestershire, from the larger towns to small villages. We work right across the region, from Elcock's Brook to Birmingham (14 miles away).

Our repair technicians cover all of the B97 postcode area and the streets around it. Local streets include Sillins Lane and Cruisehill Lane. We also cover the places around Elcock's Brook: Ham Green (1 mile south-east), Cruise Hill (1 mile south-west), Callow Hill (1 mile east), Webheath (2 miles north-east) and Hunt End (2 miles east). Larger places within reach include Worcester (11 miles south-west), Redditch (3 miles north-east), Kidderminster (13 miles north-west), Bromsgrove (5 miles north-west), Droitwich Spa (7 miles west) and Evesham (13 miles south).

Near you in Elcock's Brook

In Elcock's Brook, that means homes near St Augustine's Catholic High School and the streets around them. The closest station to Elcock's Brook is Redditch station, about 2.7 miles north-east. Nearby you’ll also find Alexandra Hospital (3.3 miles east) and Kingfisher Shopping Centre (2.8 miles north-east). Not far away are Christopher Cadbury Wetland Reserve.

Map of Elcock's Brook © OpenStreetMap contributors

FAQs for Elcock's Brook

How long does re-enamelling take?

One day for most baths and can be used the day after. We’ll confirm timings when we quote.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Does the bath have to be removed?

Not at all. Everything is done in your bathroom, with the room masked and ventilated.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.

How durable is a resurfaced bath?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

What happens after I send pictures?

You will get a fixed quote back, typically with dates to choose from. There is no obligation to book.

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

Should you replace it?

Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

What you get with us

  • Fixed prices from your pictures
  • Colour mixed on the day to match
  • Nothing taken out or refitted
  • Most jobs done in one visit

Read our full price list and bath cost comparison.

What happens on the day

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Clear toiletries, mats and anything else from around the area
  • Let us know about parking or access

How to get a price

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.