Worcestershire · England
Bath Re-enamelling for Feckenham homes
Bath re-enamelling across Feckenham and nearby, typically in one visit.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
Bath re-enamelling in Feckenham, done in place
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It normally takes one visit, and can be used again the following day. We’re frequently asked to fix stains that won’t shift and an original cast iron bath that needs restoring, on pressed steel baths, Victorian roll-tops and cast iron baths.
All our work is covered by a one-year guarantee.
- Area
- Feckenham (B96)
- County
- Worcestershire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Feckenham
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that is rusted through
- A bath split right through the body
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Also near Feckenham
What else we do in Feckenham
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before booking. We take into account:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- What the surface is made of
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Quotes from your pictures
Most quotes are done from photos alone. To make it quick:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- The material, if you know it
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Feckenham and nearby
Feckenham is about 4 miles south-west of Redditch, in Worcestershire. We travel to homes and businesses in Feckenham and nearby villages, so there is no workshop to go to. Feckenham is one of 376 towns and villages in Worcestershire where we work. Our nearest city page is Birmingham, about 16 miles away.
Every address in B96 is covered. Whether you live on High Street, Turton Gardens and Coupass Cottages or a nearby road, we can come to you. We also cover the places around Feckenham: Shurnock (1 mile east), Ham Green (1 mile north), Cruise Hill (1 mile north), Holberrow Green (2 miles south-east) and Elcock's Brook (2 miles north). We also work in nearby towns such as Worcester (10 miles west), Redditch (4 miles north-east), Kidderminster (14 miles north-west), Bromsgrove (6 miles north-west), Droitwich Spa (7 miles west) and Evesham (11 miles south).
Around Feckenham
We visit homes around Feckenham CofE First School, The Rose And Crown Public House And Attached Outbuilding and Ridgeway Middle School, among other places. The closest station to Feckenham is Redditch station, roughly 4.2 miles north-east. Nearby you will also find Inkberrow Castle (2.6 miles south) and Alexandra Hospital (3.8 miles north-east). Open spaces near Feckenham include Grafton Wood.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Repair dripping taps early
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Feckenham: your questions answered
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How much does bath re-enamelling cost in Feckenham?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item with your B96 postcode.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
What we are called out for in Feckenham
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Common reasons people in Feckenham contact us are:
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- A coloured bath you want in white
Before booking anyone
- What the guarantee covers, and for how long
- What protection goes down before work starts
- What preparation is included
- A fixed price, and whether VAT is included
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Open a window if you can
- Ensure the area is dry
- Keep children and pets away from the room on the day
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
