South Lanarkshire · Scotland
Bath Re-enamelling in Elvanfoot
Damaged bath in Elvanfoot? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coloured bath you want in white
- A bath that stays dull however much you clean it

Bath re-enamelling at your home in Elvanfoot
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. We regularly repair basins & shower trays, pressed steel baths and acrylic baths, and people most frequently call us about a peeling or bubbling previous coating and wear marks under the taps.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

- Location
- Elvanfoot (ML12)
- Region
- South Lanarkshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
After the repair has cured, a few habits help it last:
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Doing more than one item at once
- How much damage there is
- Unusual colours or finishes
- Where the damage is and how we get to it
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
You can typically get a fixed price without us visiting. To make it quick:
- Details of any past repairs
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
Also near Elvanfoot
Other services in Elvanfoot
What we are called out for in Elvanfoot
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
People usually call us after spotting one of these:
- A coloured bath you want in white
- An old resurfacing that’s failing
- Thin, worn enamel in places
- Chips and rust in more than one place
What to look for in a quote
- How soon you can use it again
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- What happens if the damage is worse than the pictures show
Common questions in Elvanfoot
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
How long is the bath unusable?
Generally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Our work in Elvanfoot
Elvanfoot is about 22 miles south of Carluke, in South Lanarkshire. We visit clients in Elvanfoot and the surrounding area, so nothing has to leave your home. We cover 139 places in South Lanarkshire, from the larger towns to small villages. Our jobs stretch from Elvanfoot to Glasgow (38 miles away).
Postcode districts we cover here: ML12. Whether you live on Station Road and Dumfries Road or anywhere nearby, a technician can come to you. Close by, we cover Crawford (2 miles north), Abington (4 miles north), Leadhills (4 miles west), Wanlockhead (6 miles south-west) and Crawfordjohn (6 miles north-west). Larger places within reach include Biggar (14 miles north), Douglas (11 miles north-west), Coalburn (14 miles north-west) and Symington (11 miles north).
What’s near Elvanfoot
A little further out are Crawford Castle (2.5 miles north). Green spaces nearby include Dun Law.
Should you replace it?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Why book with us
- Colour-matched on site
- We leave the room as we found it
- One visit for most repairs
- Straight answers about what a repair can do
See our prices page or guide to resurfacing and replacement costs.
What happens on the day
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
- Tell us about any previous repairs or coatings
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you’re in Elvanfoot, and we will come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.

