South Lanarkshire · Scotland
Bath re-enamelling & resurfacing in Crawford, South Lanarkshire
Bath re-enamelling in Crawford without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why us?
- We will tell you if it’s not worth repairing
- A year’s guarantee on all work
- CHAS and Constructionline accredited
- No extra charge for your area
Take a look at our pricing or guide to resurfacing and replacement costs.
About our bath re-enamelling in Crawford
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We work on acrylic baths, pressed steel baths and Victorian roll-tops, and people most frequently call us about wear marks under the taps and enamel that’s lost its shine and feels rough.
All our work comes with a one-year guarantee, wherever you are in South Lanarkshire.
- Where
- Crawford (ML12)
- Region
- South Lanarkshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
FAQs for Crawford
Do you work in Crawford?
Yes, we do. We send a technician to Crawford for every job, and the price is the same as everywhere else.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we will ask for another angle.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Are there extra charges for Crawford?
We do not add a call-out fee. The fixed price covers the visit and the work.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
How to care for the repair
Simple care helps the repair last. We recommend:
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Work for landlords and builders
Landlords, letting agents and housing providers in Crawford use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Crawford and nearby
Crawford is about 20 miles south of Carluke, in South Lanarkshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Crawford is one of 139 places in South Lanarkshire where we work. Our jobs stretch from Crawford to Glasgow (36 miles away).
All of ML12 is covered. Jobs here include addresses on Lindsay Square, Dunalastair Road and Carlisle Road and the roads around them. Nearby, we also work in Elvanfoot (2 miles south), Abington (2 miles north-west), Crawfordjohn (5 miles west), Roberton (5 miles north) and Leadhills (6 miles south-west). We also work in nearby towns such as Lanark (15 miles north), Lesmahagow (15 miles north-west), Biggar (12 miles north-east), Douglas (10 miles north-west), Coalburn (13 miles north-west) and Symington (9 miles north).
Near you in Crawford
Typical jobs here are in homes near Parish Church and Post Horn Hotel, among other places. Other landmarks nearby include Crawford Castle (0.5 miles north). The countryside around Crawford includes Tewsgill Hill.
Places near Crawford
Also in Crawford
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- Where the damage is and how we get to it
- What the surface is made of
- The colour and finish to match
- The type of damage
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- A coin beside the damage so we can judge size
- Where you are, by postcode
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
When a repair isn’t the answer
It helps to know what we can’t do too:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly.
Materials we work on in Crawford
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
