Somerset · England
Bath Re-enamelling for Emborough homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Emborough. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Covering Emborough
Emborough is about 3 miles south-west of Midsomer Norton, in Somerset. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Emborough is one of 640 places in Somerset we cover.
We cover every part of BA3 and the streets around it. Other places close to Emborough include Cutler's Green (1 mile north-west), East End (1 mile west), Binegar (1 mile south), Chewton Mendip (1 mile north-west) and Bathway (1 mile west). Within a short drive, we also cover Frome (10 miles east), Wells (6 miles south-west), Midsomer Norton (3 miles north-east), Shepton Mallet (5 miles south), Street (13 miles south-west) and Glastonbury (10 miles south-west).
Around Emborough
Locally, our jobs take us to homes close to Church of the Blessed Virgin Mary and Old Down Inn, among other places. Well-known places in the area include Oakhill Manor Museum (2.9 miles south-east) and Paulton Memorial Hospital (3.7 miles north-east). Green spaces nearby include Priddy Mineries and Lechmere Water.
How we handle bath re-enamelling in Emborough
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for worn patches where water runs and sits and chips and rust in more than one place, in basins & shower trays, cast iron baths and acrylic baths.
Whatever the size of the job, you get the same one-year guarantee in Emborough and across Somerset.
- Where
- Emborough (BA3)
- County
- Somerset
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Emborough
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and we will quote them together.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Does re-enamelling smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
How it works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take most of the day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Make sure the room can be ventilated
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
Nearby places to Emborough
Also in Emborough
What affects the price in Emborough
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- Doing more than one item at once
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- A wider photo showing the whole bath
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why Emborough customers choose us
- CHAS and Constructionline accredited
- Work done at your home or business
- Nothing taken out or refitted
- Every repair guaranteed for a year
Take a look at our prices page or bath cost comparison.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
What we’re called out for in Emborough
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Look out for any of the following:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
Before booking anyone
- How long it needs to cure
- How changes to the job are handled
- How the colour is matched
- Aftercare advice
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Do not use the bath until it has fully cured
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Don’t leave a chip unrepaired
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Honest limits
We will always be straight with you, so here’s what a repair can’t fix:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Emborough
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
