East Riding of Yorkshire · England
Bath Re-enamelling in Etherdwick
Our technicians come to Etherdwick for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Bath re-enamelling in Etherdwick without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a roll-top that’s seen better days and a coloured bath you want in white, in pressed steel baths, basins & shower trays and cast iron baths.
You get a one-year guarantee, the same in Etherdwick as everywhere else we work.
- Location
- Etherdwick (HU11)
- County
- East Riding of Yorkshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Etherdwick
What else we do in Etherdwick
Where we work around Etherdwick
Etherdwick is about 7 miles south of Hornsea, in East Riding of Yorkshire. Clients in Etherdwick get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Etherdwick is one of 299 places in East Riding of Yorkshire we cover. We work right across the region, from Etherdwick to Leeds (58 miles away).
Every address in HU11 is covered, from the main roads to the quietest streets. Close by, we cover Tansterne (1 mile west), Aldbrough (1 mile north-east), Flinton (1 mile south-west), West Newton (2 miles west) and Withernwick (3 miles north-west). Larger places within reach include Beverley (12 miles west), Hessle (14 miles south-west), Cottingham (12 miles west), Hornsea (7 miles north), Hedon (6 miles south-west) and Anlaby (13 miles west).
Near you in Etherdwick
Our customers here include homes close to George And Dragon Public House, Church of Saint Bartholomew and Aldbrough Primary School and the streets around them. Further afield, we also cover the area around Aldbrough Castle (1.1 miles north).
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Etherdwick
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Should you replace it?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- We come to you, anywhere in the UK
- Colour mixed on the day to match
- Everything repaired in place
- No extra charge for your area
See our full price list and guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Etherdwick. The price comes down to:
- The material
- Where the damage is and how we get to it
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
When you take your pictures, these tips help us give you a firm price:
- What it’s made of, if you know
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- Details of any past repairs
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
When to call us in Etherdwick
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.
These are the problems we’re asked about most:
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
- Wear marks under the taps
Questions to ask before you book
- When it can be used again
- If travel is included in the price
- What protection goes down before work starts
- Aftercare advice
Common questions in Etherdwick
Do you come to Etherdwick?
Yes. We cover the entire UK and come to Etherdwick and the rest of East Riding of Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you price it without visiting?
Normally, yes. Clear photos let us give you a fixed price without visiting.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- A quick wipe after use keeps limescale away
- Fix dripping taps quickly
- Never use suction bath mats
- Don’t leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes most of the day.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
- Tell us if there are stairs or a lift
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
