Blackburn with Darwen · England
Bath Re-enamelling in Ewood
Bath re-enamelling across Ewood and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coloured bath you want in white
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
About our bath re-enamelling in Ewood
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a roll-top that’s seen better days and worn patches where water runs and sits, we can help, on acrylic baths, cast iron baths and Victorian roll-tops alike.
A one-year guarantee comes as standard.
- Area
- Ewood (BB2, BB3)
- Area hub
- Blackburn with Darwen
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
What affects the price in Ewood
Prices start from £350. You will know the full cost before booking. We take into account:
- Unusual colours or finishes
- What the surface is made of
- Whether old repairs or coatings need taking off
- Access to the area
Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what helps:
- Where you are, by postcode
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
What we are called out for in Ewood
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
What your quote should include
- What prep work is covered
- Who turns up on the day
- How long it needs to cure
- What protection goes down before work starts
Ewood and nearby
Ewood is about 1 mile south of Blackburn, in Blackburn with Darwen. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Ewood is one of 42 towns and villages in Blackburn with Darwen where we work. Our nearest city page is Manchester, about 21 miles away.
Jobs in BB2 and BB3 are booked in the same way as anywhere else. Whether you live on Heys Lane, Mona Road and Kirby Road or a nearby road, we can come to you. Close by, we cover Lower Darwen (1 mile south-east), Blackamoor (1 mile east), Blackburn (1 mile north), Earcroft (1 mile south) and Whalley Range (2 miles north). Further out, we also cover Little Harwood (3 miles north-east), Rishton (4 miles north-east), Brownhill (3 miles north), Wilpshire (4 miles north), Whitebirk (3 miles north-east) and Hoddlesden (3 miles south-east). Ewood is among the bigger towns we cover in Blackburn with Darwen.
Around Ewood
Typical jobs here are in homes near Longshaw Infant School, St Wilfrid's Church of England Academy and Darwen Vale High School, among other places. For rail, the closest station is Mill Hill (Lancs) station, about 0.7 miles north-west. Other landmarks nearby include The Mall Blackburn (1.5 miles north) and Ainsworth And Sons Ltd Museum (1.3 miles north).
Places near Ewood
What else we do in Ewood
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the day after.
How to prepare
- Let us know if it has been repaired before
- Ensure the area is dry
- Mention any parking restrictions or tricky access
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
Common questions in Ewood
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
Read our pricing or resurfacing vs replacement cost guide.
Aftercare tips
Simple care helps the repair last. We recommend:
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Keep suction mats out of the bath
- Do not use the bath until it has fully cured
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Landlords, agents and businesses in Ewood
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Ewood, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
About our accreditations · Every repair comes with a one-year guarantee.
