East Riding of Yorkshire · England
Bath Re-enamelling in Fangfoss
Full bath re-enamelling and resurfacing in Fangfoss, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- A dull, rough surface that won’t come clean
About our bath re-enamelling in Fangfoss
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, we can typically put it right, on pressed steel baths, basins & shower trays and Victorian roll-tops alike.
Big or small, it’s backed by a one-year guarantee in Fangfoss and across East Riding of Yorkshire.
- Where
- Fangfoss (YO41)
- Area hub
- East Riding of Yorkshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Fangfoss
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Repair or replace in Fangfoss?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Everything repaired in place
- Generally one visit, start to finish
- We’ll tell you if it’s not worth repairing
- No extra charge for your area
Read our prices page and resurfacing vs replacement cost guide.
What happens on the day
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
How to get a price
Email us a picture of the damage and one of the whole item, with your YO41 postcode, and we will reply with a fixed price.
Read more
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Keeping it looking good
So the finish stays in good condition:
- Do not use the bath until it has fully cured
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- Unusual colours or finishes
- Doing more than one item at once
- The material and finish
- How easy the damage is to reach
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Places near Fangfoss
What else we do in Fangfoss
What we’re called out for in Fangfoss
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The things customers generally mention when they call include:
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- A roll-top that’s seen better days
What to look for in a quote
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- How your room will be protected
Fangfoss questions
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Which areas do you work in?
The entire UK, including all of East Riding of Yorkshire. Send your postcode with your photos and we will confirm dates.
Are there extra charges for Fangfoss?
There’s no separate call-out charge. Your fixed price includes everything.
About Fangfoss
Fangfoss is about 4 miles north-west of Pocklington, in East Riding of Yorkshire. Whether you’re in the middle of Fangfoss or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Fangfoss is one of 299 places in East Riding of Yorkshire where we work. We work right across the region, from Fangfoss to Leeds (about 31 miles away).
We cover every part of the YO41 postcode area and the streets around it. Local streets include The Paddock, The Orchard and Beechwood Close. Other places close to Fangfoss include Bolton (1 mile south-east), Gowthorpe (1 mile north), Youlthorpe (1 mile north), Full Sutton (2 miles north-west) and Wilberfoss (3 miles south-west). We also work in nearby towns such as Pocklington (4 miles south-east), Market Weighton (10 miles south-east), Howden (15 miles south), Stamford Bridge (3 miles north-west), Gilberdyke (15 miles south) and Holme upon Spalding Moor (10 miles south).
Landmarks near Fangfoss
We visit homes around Carpenters Arms and Church of St Martin and the streets around them. Further afield, we also cover the area around Penny Arcadia (3.5 miles south-east) and Buttercrambe Castle (3.8 miles north-west). Open spaces near Fangfoss include Bishop Wilton Wold.
About our accreditations · Every repair comes with a one-year guarantee.
