East Riding of Yorkshire · England
Bath Re-enamelling in Holme upon Spalding Moor
Bath re-enamelling in and around Holme upon Spalding Moor: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Chips and rust in more than one place
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Holme upon Spalding Moor clients choose us
- Colour mixed on the day to match
- No need to remove anything
- One price list for the entire UK
- Straight answers about what a repair can do
See our full price list and guide to resurfacing and replacement costs.
Bath re-enamelling in Holme upon Spalding Moor, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Whether it’s lots of chips and rust spots and an outdated colour you’d like to change, we can normally put it right, on cast iron baths, basins & shower trays and pressed steel baths alike.
You get a one-year guarantee, the same in Holme upon Spalding Moor as everywhere else we work.
- Area
- Holme upon Spalding Moor (YO43)
- Region
- East Riding of Yorkshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
A repair isn’t right for every job, including:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Holme upon Spalding Moor and nearby
Holme upon Spalding Moor is about 7 miles south of Pocklington, in East Riding of Yorkshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in all 299 towns and villages across East Riding of Yorkshire, from the larger towns to small villages. Our jobs stretch from Holme upon Spalding Moor to Leeds (about 32 miles away).
Our visits in YO43 are booked in the same way as anywhere else. Local streets include High Street, Market Weighton Road and Runner End, and we cover them all. We also cover the places around Holme upon Spalding Moor: Moor End (1 mile south-east), Sand Hole (1 mile south), Water End (1 mile west), Rascal Moor (1 mile south-east) and High Garth (2 miles south-east). Larger places within reach include Beverley (14 miles east), Goole (10 miles south-west), Pocklington (7 miles north), Cottingham (15 miles east), Market Weighton (5 miles north-east) and Brough (11 miles south-east).
Landmarks near Holme upon Spalding Moor
Typical jobs here are in homes near Church of All Saints, The Blacksmith Arms and Holme-upon-Spalding Moor Primary School and the streets around them.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in East Riding of Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
- Repair dripping taps early
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Questions from Holme upon Spalding Moor
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Nearby places to Holme upon Spalding Moor
What else we do in Holme upon Spalding Moor
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes most of the day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
What we’re called out for in Holme upon Spalding Moor
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
People normally call us after spotting something like this:
- A peeling or bubbling previous coating
- Lots of chips and rust spots
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
What your quote should include
- How to look after the finish
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- How soon you can use it again
About our accreditations · Every repair comes with a one-year guarantee.
