North Somerset · England
Bath re-enamelling & resurfacing in Farleigh, North Somerset
Local bath re-enamelling for Farleigh: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Stains that won’t shift
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- Usually one visit, start to finish
- One-year guarantee on every repair
Take a look at our pricing or bath cost comparison.
Bath re-enamelling in Farleigh, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our technicians work on pressed steel baths, Victorian roll-tops and acrylic baths, and common reasons people contact us are stains that won’t shift and lots of chips and rust spots.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Area
- Farleigh (BS48)
- Region
- North Somerset
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Farleigh
Prices start from £350. We price every job individually, from your photos. What matters most is:
- What kind of damage it is
- The colour and finish to match
- What the surface is made of
- Previous DIY repairs that have to come out
Our prices are the same across the UK, with no extra for Farleigh. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Any earlier repairs or coatings
- Where you are, by postcode
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Covering Farleigh
Farleigh is about 2 miles south-east of Nailsea, in North Somerset. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Farleigh is one of 86 places in North Somerset we cover.
Here we cover the BS48 postcode area. Jobs here include addresses on Farleigh Road, Uncombe Close and Fairfield Close and the roads around them. Neighbouring places we cover include Backwell Green (1 mile north), Backwell Common (1 mile north-west), Backwell (1 mile west), Flax Bourton (1 mile east) and Chelvey Batch (2 miles south-west). Further out, we also cover Weston-super-Mare (10 miles south-west), Portishead (5 miles north-west), Clevedon (6 miles west), Milton (10 miles south-west), Yatton (5 miles south-west) and Worle (10 miles south-west).
Near you in Farleigh
Locally, our jobs take us to homes close to Church of St Andrew, Nailsea School and Backwell Church of England Junior School, among other places. Farleigh’s nearest station is Nailsea & Backwell station, roughly 1 mile west of the centre. Other landmarks nearby include Barrow Hospital (2.7 miles east) and Oakham Treasures (3.3 miles north). Green spaces nearby include Backwell Lake and Clapton Moor.
Towns and villages near Farleigh
What else we do in Farleigh
Keeping it looking good
How the surface is treated afterwards matters:
- Don’t use the bath until it has fully cured
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Get any chip repaired quickly
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- A bath split right through the body
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Farleigh: your questions answered
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Do you come to Farleigh?
We do. We send a technician to Farleigh for every job, and the price is the same as everywhere else.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can I get a quote without a visit?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
What happens next?
We review the photos and send a fixed quote.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Farleigh as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What happens on the day
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Advice
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
