North Somerset · England
Bath re-enamelling & resurfacing in Flax Bourton, North Somerset
Fixed-price bath re-enamelling in Flax Bourton and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Several chips and rust patches
- A coloured bath you want in white
How we handle bath re-enamelling in Flax Bourton
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Typical jobs include an outdated colour you’d like to change and a coating lifting around the plughole, across cast iron baths, Victorian roll-tops and pressed steel baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Flax Bourton (BS48)
- Area hub
- North Somerset
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Flax Bourton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Keep an eye out for these signs:
- A roll-top that is seen better days
- A coating lifting around the plughole
- An outdated colour you’d like to change
- Lots of chips and rust spots
Questions to ask before booking
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
- How long it needs to cure
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your photos. The main factors are:
- The type of damage
- The material and finish
- The colour and finish to match
- Doing more than one item at once
The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- A photo taken from further back
- Something in shot to show the size
- The postcode, so we can plan the visit
- The material, if you know it
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
What a repair can’t fix
It helps to know what we can’t do too:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Flax Bourton
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
- Fix dripping taps quickly
- Have chips seen to early
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Flax Bourton: your questions answered
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you cover Flax Bourton?
Yes, we do. We send a technician to Flax Bourton for every job, and the price is the same as everywhere else.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What areas do you cover?
Across the UK, so Flax Bourton is covered. Prices do not change with location.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the day after.
Getting ready for the visit
- Ensure the area is dry
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Read more
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repair or replace in Flax Bourton?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Flax Bourton. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Flax Bourton customers choose us
- Nothing taken out or refitted
- Normally one visit, start to finish
- A fixed quote before booking
- Same prices wherever you are
Read our full price list or resurfacing vs replacement cost guide.
Also near Flax Bourton
What else we do in Flax Bourton
About Flax Bourton
Flax Bourton is about 2 miles east of Nailsea, in North Somerset. Jobs in Flax Bourton are booked in like any other job: a fixed price from your photos, then a visit to do the work. We work in all 86 towns and villages in North Somerset. Our jobs stretch from Flax Bourton to Birmingham (about 80 miles away).
Our visits in BS48 are booked in the same way as anywhere else. Whether you live on Station Road, Parsons Mead and Main Road or a nearby road, a technician can come to you. We also cover the places around Flax Bourton: Backwell Green (1 mile west), Farleigh (1 mile west), Backwell Common (1 mile west), Wraxall (2 miles north-west) and Backwell (2 miles west). Within a short drive, we also cover Weston-super-Mare (11 miles south-west), Portishead (5 miles north-west), Clevedon (6 miles west), Milton (11 miles south-west), Yatton (6 miles south-west) and Worle (10 miles south-west).
Local landmarks in Flax Bourton
In Flax Bourton, that means homes near Nailsea School, Flax Bourton Church of England Primary School and Church of St Michael and All Angels. The nearest railway station is Nailsea & Backwell station, roughly 1.8 miles west of the centre. Other landmarks nearby include Oakham Treasures (3.1 miles north) and Barrow Hospital (1.9 miles east). For a walk, there’s Backwell Lake and Dundry Hill.
About our accreditations · Every repair comes with a one-year guarantee.
