Staffordshire · England
Bath Re-enamelling in Fauld
Local bath re-enamelling for Fauld: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
What happens on the day
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
Getting a price
To get a price, send two or three photos using our quote form or ring us. We will say immediately whether it can be repaired.
Related advice
How we handle bath re-enamelling in Fauld
Most baths are re-enamelled in a day, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. Whether it’s a roll-top that’s seen better days and chips and rust in more than one place, we can help, whatever the material.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Fauld (DE13)
- Area hub
- Staffordshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Fauld
Also in Fauld
Landlord and trade work in Fauld
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Fauld, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Questions from Fauld
What areas do you cover?
All of Staffordshire, and the rest of the UK. There’s no extra charge for travel.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you cover Fauld?
Yes. We cover the whole UK and come to Fauld. Send photos and we will quote, or call 0345 017 0787.
How much does bath re-enamelling cost in Fauld?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your DE13 postcode.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Do the materials smell?
Expect a mild smell while we’re working.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or resurfacing vs replacement cost guide.
When we’d advise against a repair
A repair isn’t right for every job, including:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Fauld. The price comes down to:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- Unusual colours or finishes
We charge the same wherever you are, with no extra for Fauld. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- Any earlier repairs or coatings
- Any details about the material
- One picture of the entire bath
- Something in shot to show the size
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Fauld and nearby
Fauld is about 5 miles north-west of Burton upon Trent, in Staffordshire. Jobs in Fauld are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Our technicians cover 512 places across Staffordshire. We work right across the region, from Fauld to Birmingham (about 28 miles away).
Jobs in DE13 are booked in the same way as anywhere else. We also travel to Scropton (1 mile north), Hanbury (1 mile south-west), Woodend (2 miles south-west), Blackbrook (2 miles south) and Foston (2 miles north). Larger places within reach include Burton upon Trent (5 miles south-east), Lichfield (13 miles south), Rugeley (12 miles south-west), Burntwood (15 miles south-west), Cheadle (14 miles north-west) and Uttoxeter (7 miles north-west).
What’s near Fauld
We visit homes around Church of St Paul, among other places. Fauld’s nearest station is Tutbury & Hatton station, roughly 1.6 miles east. A little further out are Tutbury Museum (1.4 miles east) and Tutbury Castle (1.2 miles east).
How to look after the repair
So the finish stays in good condition:
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Do not let dyes or oils sit on the finish
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
