Staffordshire · England
Bath re-enamelling & resurfacing in Blackbrook, Staffordshire
Our technicians come to Blackbrook for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Blackbrook
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Whether it’s a coating lifting around the plughole and thin, worn enamel in places, we can generally put it right, on Victorian roll-tops, pressed steel baths and cast iron baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Blackbrook (DE13)
- Region
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Blackbrook and the surrounding area
Blackbrook is about 4 miles north-west of Burton upon Trent, in Staffordshire. We visit homes and businesses in Blackbrook and the surrounding area, so you do not need to take anything anywhere. We work in 512 places in Staffordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 26 miles away.
Our technicians cover all of the DE13 postcode area and the streets around it. We also cover the places around Blackbrook: Woodend (1 mile west), Hanbury Woodend (1 mile west), Anslow Gate (1 mile south-east), Hanbury (1 mile north-west) and Fauld (2 miles north). Further out, we also cover Burton upon Trent (4 miles south-east), Tamworth (14 miles south), Cannock (15 miles south-west), Lichfield (11 miles south), Rugeley (10 miles south-west) and Burntwood (13 miles south-west).
Landmarks near Blackbrook
For rail, the closest station is Tutbury & Hatton station, roughly 2.9 miles north-east of the centre. Nearby you’ll also find Tutbury Museum (2.3 miles north-east) and Queen's Hospital (3.2 miles east). For a walk, there is Brankley Pastures.
How it works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
- Let the surface dry out before the visit
Ask for a price
Send us pictures of the damage and one of the entire item, with your DE13 postcode, and we will reply with a fixed quote.
Read more
Common questions in Blackbrook
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will there be a smell?
Expect a mild smell while we’re working.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Staffordshire.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs right away
- Keep toiletries on a shelf rather than in the bath
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Also near Blackbrook
What else we do in Blackbrook
When to call us in Blackbrook
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
These are the problems we are asked about most:
- Several chips and rust patches
- Stains that won’t shift
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
- What prep work is covered
- Aftercare advice
When we would advise against a repair
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
Send us pictures and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- The material
- Whether we combine several jobs
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- The material, if you know it
- Natural light rather than flash
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Repair or replace in Blackbrook?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Blackbrook. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Blackbrook clients choose us
- Everything repaired in place
- Work done at your home or business
- Fixed prices from your photos
- We leave the room as we found it
Take a look at our pricing or resurfacing vs replacement cost guide.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Landlords, letting agents and housing providers in Blackbrook use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
