Oxfordshire · England

Bath Re-enamelling in Fawley Bottom

Full bath re-enamelling and resurfacing for homes and businesses in Fawley Bottom and across Oxfordshire. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Fawley Bottom

Bath re-enamelling in Fawley Bottom without replacing anything

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on Victorian roll-tops, pressed steel baths and basins & shower trays, and the jobs we see most are a coating lifting around the plughole and a coloured bath you want in white.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Before and after: an old basin refinished to bright white
Location
Fawley Bottom (RG9)
Region
Oxfordshire
Warranty
One year on every repair
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

What we do, step by step

Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for the best part of a day. Before leaving, we tell you how long to leave it and how to look after it.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Let us know which floor the room is on
  • Mention any earlier repairs or resurfacing

Getting a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Read more

Common problems we fix in Fawley Bottom

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

You may need us if you’ve spotted:

  • A period or roll-top bath worth keeping
  • An outdated colour you’d like to change
  • Several chips and rust patches
  • Enamel that’s lost its shine and feels rough

What to look for in a quote

  • Whether the price covers travel
  • How the colour is matched
  • What aftercare is recommended
  • The length of the guarantee and what it covers

How to compare quotes

Questions from Fawley Bottom

Do you resurface freestanding baths?

Yes. We can do the inside and outside.

Can you redo someone else’s repair?

Most of the time. Tell us what was done before.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Oxfordshire.

Can a failed resurfacing be redone?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Will there be a smell?

Some materials have a smell while they’re applied. It clears as the materials cure.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Are there extra charges for Fawley Bottom?

We don’t add a call-out fee. Your fixed price includes everything.

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

What we cannot put right

Honesty matters more than a booking, so here’s what a repair will not do:

  • Leaking taps or wastes (a plumber’s job)
  • An acrylic bath that flexes badly underfoot
  • A bath that’s rusted through

If in doubt, send photos and we will say what we think before booking.

Surfaces we repair

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

Repair or replace: which is better?

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why choose Surface Doctor in Fawley Bottom

  • One-year guarantee on every repair
  • Colour-matched on site
  • Accredited with CHAS, Constructionline and SafeContractor
  • One price list for the entire UK

Take a look at our pricing or resurfacing vs replacement cost guide.

About Fawley Bottom

Fawley Bottom is about 3 miles north of Henley-on-Thames, in Oxfordshire. Across the RG9 area, a technician comes to you. Fawley Bottom is one of 443 towns and villages in Oxfordshire where we work. Our jobs stretch from Fawley Bottom to London (36 miles away).

Jobs in RG9 are booked in the same way as anywhere else. Other places close to Fawley Bottom include Fawley (1 mile east), Middle Assendon (1 mile south-west), Lower Assendon (1 mile south), Bix (1 mile south-west) and Catslip (2 miles west). Further out, we also cover Didcot (14 miles west), Thame (12 miles north), Benson (8 miles west), Chinnor (9 miles north), Tilehurst (9 miles south-west) and Wallingford (9 miles west).

What’s near Fawley Bottom

We visit homes around St Mary the Virgin's Church and The Walnut Tree pub and the streets around them. Fawley Bottom’s nearest station is Henley-On-Thames station, roughly 3 miles south. Well-known places in the area include Frazer Nash Archives (3.4 miles south). Not far away are Warburg Nature Reserve.

Map of Fawley Bottom © OpenStreetMap contributors

Prices and what affects them

Prices start from £350. A fixed quote means you know the cost before you book. We look at:

  • Whether it’s a chip, crack, burn or wear
  • Whether we combine several jobs
  • How easy the damage is to reach
  • Any earlier repairs that need removing first

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Getting a price from pictures

Good photos mean an accurate price. Here’s what helps:

  • A coin beside the damage so we can judge size
  • Your postcode, so we can check dates
  • A wider photo showing the whole bath
  • Whether it’s been repaired or coated before

To get a price, send two or three pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.