Oxfordshire · England
Bath re-enamelling & resurfacing in Fawley, Oxfordshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Fawley. Send photos for a free, fixed quote.
- Resurfacing from £350
- A roll-top that is seen better days
- A coating lifting around the plughole
Bath re-enamelling at your home in Fawley
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s a roll-top that’s seen better days and several chips and rust patches, we can generally put it right, whatever the material.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Fawley (RG9)
- Region
- Oxfordshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Fawley?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Look out for any of the following:
- Several chips and rust patches
- A coloured bath you want in white
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
Before booking anyone
- What aftercare is recommended
- What happens if they find more damage
- How soon you can use it again
- What preparation is included
Repair or replace in Fawley?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
What you get with us
- Nothing taken out or refitted
- We leave the room as we found it
- A fixed quote before booking
- Generally one visit, start to finish
Take a look at our full price list and resurfacing vs replacement cost guide.
Fawley questions
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
The process
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. Most jobs take a full day, and you can get on with other things while we’re there.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
Before we arrive
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
What affects the price in Fawley
Resurfacing from £350. There is no charge for travel to Fawley. The price depends on:
- The material and finish
- How much damage there is
- Whether old repairs or coatings need taking off
- Access to the area
We charge the same wherever you are, with no extra for Fawley. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what helps:
- A picture taken from further back
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Any details about the material
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Towns and villages near Fawley
Other services in Fawley
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
About Fawley
Fawley is about 6 miles west of Marlow, in Oxfordshire. Anywhere in RG9, we carry out the work at your property. Fawley is one of 443 towns and villages in Oxfordshire we cover. Our nearest city page is London, about 35 miles away.
Our repair technicians cover all of the RG9 postcode area and the streets around it. If you’re just outside Fawley, we cover Fawley Bottom (1 mile west), Middle Assendon (1 mile west), Lower Assendon (1 mile south-west), Bix (2 miles west) and Henley-on-Thames (3 miles south). Within a short drive, we also cover Didcot (15 miles west), Thame (12 miles north), Benson (9 miles west), Chinnor (9 miles north), Tilehurst (10 miles south-west) and Wallingford (10 miles west).
What’s near Fawley
Our customers here include homes close to The Walnut Tree pub, St Mary the Virgin's Church and Fawley Court and Temple Island. For rail, the closest station is Henley-On-Thames station, about 2.7 miles south of the centre. Other landmarks nearby include Marlow Community Hospital (5.8 miles east) and Frazer Nash Archives (3.1 miles south). The countryside around Fawley includes Warburg Nature Reserve.
Looking after it afterwards
It’s all simple stuff:
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Have chips seen to early
- Dry the bath after use to stop limescale
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
