Suffolk · England
Bath Re-enamelling for Gulpher homes
Full bath re-enamelling and resurfacing in Gulpher, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- An old resurfacing that’s failing
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- Don’t leave a chip unrepaired
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How we handle bath re-enamelling in Gulpher
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We’re frequently asked to fix chips and rust in more than one place and stains that won’t shift, on acrylic baths, cast iron baths and pressed steel baths.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Gulpher (IP11)
- Area hub
- Suffolk
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Gulpher
Also in Gulpher
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Gulpher and nearby
Gulpher is about 1 mile north-east of Felixstowe, in Suffolk. Whether you are in the middle of Gulpher or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our technicians cover all 731 towns and villages across Suffolk. Our nearest city page is London, about 70 miles away.
Every address in IP11 is within our area, from the main roads to the quietest streets. We also travel to Walton (1 mile south-west), Old Felixstowe (1 mile south-east), Lower Falkenham (1 mile north), Felixstowe (1 mile south-west) and Trimley St Mary (1 mile west). Within a short drive, we also cover Ipswich (10 miles north-west), Kesgrave (7 miles north-west), Woodbridge (8 miles north), Stoke (10 miles north-west), Maidenhall Estate (10 miles north-west) and Priory Heath (8 miles north-west).
Around Gulpher
Our customers here include homes close to Colneis Junior School, Felixstowe Academy and The Feathers Inn, among other places. Also close by are Church of St Peter and St Paul (0.9 miles south-east) and Felixstowe International College (1.1 miles south-east). The nearest railway station is Felixstowe station, roughly 1 mile south. Nearby you’ll also find Felixstowe Community Hospital (1.2 miles south) and Bawdsey Radar (2.5 miles east). The countryside around Gulpher includes Trimley Marshes.
Gulpher: your questions answered
Do you cover Gulpher?
Yes. We cover the entire UK and travel to Gulpher. Send pictures and we’ll quote, or call 0345 017 0787.
Which areas do you work in?
We work UK-wide, so Gulpher is covered. Our prices are the same everywhere.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
We carry out planned and one-off repairs for housing associations and facilities teams in Suffolk and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow a full day, and we’ll keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Open a window if you can
How to get a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
When to call us in Gulpher
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- Wear marks under the taps
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
What to look for in a quote
- How the colour is matched
- How soon you can use it again
- Whether there are any call-out or travel charges
- Aftercare advice
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why Gulpher clients choose us
- Dust sheets down, tidy finish
- Same prices wherever you are
- Normally one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or bath cost comparison.
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How much damage there is
Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- Any details about the material
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- One picture of the entire bath
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
