Somerset · England
Bath re-enamelling & resurfacing in Fenny Castle, Somerset
We travel to Fenny Castle for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that’s seen better days
- A coloured bath you want in white
Work for landlords and builders
For anyone letting property in or around Fenny Castle, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Landlords, letting agents and housing providers in Fenny Castle use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
About our bath re-enamelling in Fenny Castle
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Common call-outs are for stains that won’t shift and thin, worn enamel in places, across basins & shower trays, cast iron baths and pressed steel baths.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Fenny Castle (BA5)
- County
- Somerset
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Nothing complicated is needed:
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
- Don’t let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Covering Fenny Castle
Fenny Castle is about 2 miles south-west of Wells, in Somerset. Anywhere in BA5, a technician comes to you. We work in 640 places in Somerset, from the larger towns to small villages.
We work across the BA5 postcode area and the streets around it. Neighbouring places we cover include Upper Godney (1 mile south-west), Godney (2 miles south-west), Glastonbury (3 miles south), Stileway (3 miles south-west) and Meare (4 miles south-west). Larger places within reach include Bridgwater (14 miles west), Burnham-on-Sea (13 miles west), Midsomer Norton (11 miles north-east), Shepton Mallet (7 miles east), Street (5 miles south) and Radstock (13 miles north-east).
Around Fenny Castle
Around Fenny Castle, we work in homes near The Pheasant pub, Christ Church and Wookey Primary School and the streets around them. Further afield, we also cover the area around Cave Museum (2.7 miles north-east) and Mendip Hospital (4.1 miles east). The countryside around Fenny Castle includes Ham Wall and Glastonbury Tor.
What affects the price in Fenny Castle
Resurfacing from £350. We do not charge extra for travel to Fenny Castle. The price comes down to:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- What kind of damage it is
- What the surface is made of
Our prices are the same across the UK, with no extra for Fenny Castle. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
Good photos mean an accurate price. Here’s what helps:
- A coin or ruler next to the damage for scale
- A picture taken from further back
- The material, if you know it
- One sharp close-up of the damage
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Questions from Fenny Castle
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How much does bath re-enamelling cost in Fenny Castle?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day. Before we go, we’ll explain how long to leave it and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Open a window if you can
- Keep pets and children out of the room while we work
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Fenny Castle
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Nearby places to Fenny Castle
More services for Fenny Castle
Signs you need bath re-enamelling in Fenny Castle
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.
People normally call us when they notice one of these:
- Stains that won’t shift
- Enamel that’s lost its shine and feels rough
- A roll-top that’s seen better days
- Wear marks under the taps
What to look for in a quote
- How to look after the finish
- What prep work is covered
- How the room is protected while they work
- How long it needs to cure
About our accreditations · Every repair comes with a one-year guarantee.
