Rhondda Cynon Taff · Wales
Bath Re-enamelling for Ferndale homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Ferndale. Free, fixed quotes from your photos.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
Bath re-enamelling at your home in Ferndale
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include an original cast iron bath that needs restoring and several chips and rust patches, on basins & shower trays, cast iron baths and Victorian roll-tops.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Ferndale (CF43)
- Area hub
- Rhondda Cynon Taff
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Ferndale
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Get in touch if you’ve noticed:
- Chips and rust in more than one place
- Thin, worn enamel in places
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
Questions to ask before you book
- Aftercare advice
- What protection goes down before work starts
- How soon you can use it again
- Whether there are any call-out or travel charges
Landlord and trade work in Ferndale
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How to look after the repair
To keep it looking its best for years:
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
Dry the bath after use if possible, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Your questions about bath re-enamelling in Ferndale
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
How long will the bath be out of use?
One day for most baths, ready the day after. We give you timings with the quote.
Do you come to Ferndale?
Yes. We cover the whole UK and travel to Ferndale. Send photos and we will quote, or call 0345 017 0787.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Also near Ferndale
What else we do in Ferndale
Repairing versus replacing in Ferndale
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
- Typically one visit, start to finish
- Honest advice, even when it means no job
Read our prices page or resurfacing vs replacement cost guide.
Ferndale and nearby
Ferndale is about 2 miles north-east of Rhondda, in Rhondda Cynon Taff. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 133 towns and villages in Rhondda Cynon Taff, from the larger towns to small villages.
Jobs in CF43 are booked in the same way as anywhere else. Streets in the area include High Street, Station Road and Baptist Square. Main roads around Ferndale include the A4233, so getting to you is simple. We also travel to Blaenllechau (1 mile north), Tylorstown (1 mile south-east), Penrhys (1 mile south), Ystrad (1 mile south) and Stanleytown (2 miles south-east). Within a short drive, we also cover Aberdare (4 miles north), Pontypridd (7 miles south-east), Mountain Ash (3 miles east), Tonypandy (3 miles south), Porth (4 miles south-east) and Church Village (9 miles south-east).
Landmarks near Ferndale
Locally, our jobs take us to homes close to Ferndale Community School, Darran Park Primary School and Rhondda Hotel. The closest station to Ferndale is Ystrad Rhondda station, roughly 1.5 miles south-west of the centre. Further afield, we also cover the area around Rhondda (2.2 miles south) and Llwynypia Hospital (1.9 miles south). The countryside around Ferndale includes Ferndale Lake and Mynydd Ty'n-tyle.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We clean up when we are done and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Getting a price
For a price in Ferndale, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What affects the price in Ferndale
Prices start from £350. There’s no area surcharge for Ferndale. The price reflects:
- How easy the damage is to reach
- What the surface is made of
- Whether old repairs or coatings need taking off
- The type of damage
We charge the same wherever you are, with no extra for Ferndale. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
