Rhondda Cynon Taff · Wales
Bath re-enamelling & resurfacing in Stanleytown, Rhondda Cynon Taff
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Stanleytown. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
Bath re-enamelling in Stanleytown, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with a bath that stays dull however much you clean it and a roll-top that’s seen better days, we can help, whatever the material.
Every repair comes with a one-year guarantee, wherever you are in Rhondda Cynon Taff.
- Area
- Stanleytown (CF43, CF39)
- Area hub
- Rhondda Cynon Taff
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Stanleytown
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The things customers usually mention when they call include:
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
What your quote should include
- How the room is protected while they work
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- Same prices wherever you are
- One-year guarantee on every repair
- One visit for most repairs
- Colour-matched on site
Take a look at our pricing and bath cost comparison.
Towns and villages near Stanleytown
Also in Stanleytown
Stanleytown and nearby
Stanleytown is about 2 miles north-east of Tonypandy, in Rhondda Cynon Taff. We visit clients in Stanleytown, so you don’t need to take anything anywhere. Stanleytown is one of 133 towns and villages in Rhondda Cynon Taff where we work.
Our visits in CF43 and CF39 are booked in the same way as anywhere else. Local streets include East Road, Penrhys Road and Furnace Road. Nearby, we also work in Tylorstown (1 mile north), Pontygwaith (1 mile south), Penrhys (1 mile west), Wattstown (1 mile south-east) and Llwynypia (1 mile south-west). Larger places within reach include Aberdare (5 miles north), Pontypridd (5 miles south-east), Mountain Ash (3 miles north-east), Church Village (7 miles south-east), Mountain Ash East (4 miles north-east) and Tonyrefail (4 miles south).
What’s near Stanleytown
Typical jobs here are in homes near Tylorstown Primary School, Church of Our Lady of Penrhys and Penrhys Inn, among other places. For rail, the closest station is Llwynypia station, about 1.2 miles south-west of the centre. Other landmarks nearby include Rhondda (1.7 miles south-west) and Llwynypia Hospital (0.9 miles south-west). Open spaces near Stanleytown include Tylorstown Tip and Ferndale Lake.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which generally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Keep a parking space free if you can
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Do not let dyes or oils sit on the finish
- Get any chip repaired quickly
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
For landlords and businesses
For anyone letting property in or around Stanleytown, we will quote for several properties at once. Just send photos for each address and we will price them together.
We carry out planned and one-off repairs for housing associations and facilities teams in Rhondda Cynon Taff and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
FAQs for Stanleytown
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is there any odour?
Expect a mild smell while we are working.
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We give you timings with the quote.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Which areas do you work in?
The whole UK, including all of Rhondda Cynon Taff. Just include your postcode and we will offer you dates.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
About our accreditations · Every repair comes with a one-year guarantee.
