Rhondda Cynon Taff · Wales
Bath re-enamelling & resurfacing in Ystrad, Rhondda Cynon Taff
Full bath re-enamelling and resurfacing for homes and businesses in Ystrad and across Rhondda Cynon Taff. Free, fixed quotes from your photos.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
About our bath re-enamelling in Ystrad
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s wear marks under the taps and a dull, rough surface that won’t come clean, we can generally put it right, on acrylic baths, cast iron baths and Victorian roll-tops alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Ystrad (CF41, CF40, CF43)
- Region
- Rhondda Cynon Taff
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
Send us photos and we will tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
What affects the price in Ystrad
Prices start from £350. We charge the same across the UK, including Ystrad. What changes the price is:
- Where the damage is and how we get to it
- The material and finish
- How many items we do on one visit
- The type of damage
We charge the same wherever you are, so there’s no premium for Ystrad. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
You can generally get a fixed price without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for most of the day from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Ask for a price
For a price in Ystrad, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why Ystrad customers choose us
- One price list for the entire UK
- We will tell you if it’s not worth repairing
- Work done at your home or business
- Most jobs done in one visit
See our prices page and resurfacing vs replacement cost guide.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Avoid suction-cup mats
- Do not use the bath until it has fully cured
- Do not leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Ystrad and nearby
Ystrad is about 5 miles south of Aberdare, in Rhondda Cynon Taff. Customers in Ystrad get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Ystrad is one of 133 towns and villages in Rhondda Cynon Taff we cover.
Our visits in CF41, CF40 and CF43 are booked in the same way as anywhere else. That includes homes on Tyntyla Road, Penrhys Road and Harcombe Road. If you’re just outside Ystrad, we cover Penrhys (1 mile east), Llwynypia (1 mile south-east), Llwyn-y-Pia (1 mile south-west), Tylorstown (1 mile north-east) and Stanleytown (1 mile east). Further out, we also cover Aberdare (5 miles north), Pontypridd (6 miles south-east), Mountain Ash (4 miles north-east), Porth (3 miles south-east), Church Village (8 miles south-east) and Mountain Ash East (4 miles north-east).
What’s near Ystrad
Around Ystrad, we work in homes near St Stephen's Church, The Star PH pub and Ferndale Community School and the streets around them. Ystrad’s nearest station is Ystrad Rhondda station, roughly 0.6 miles west. Further afield, we also cover the area around Llwynypia Hospital (0.6 miles south-east) and Rhondda (0.9 miles south-west). Not far away are Ferndale Lake and Mynydd Ty'n-tyle.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We are used to working with agents and managing companies. Send the address, photos and access details.
Common questions in Ystrad
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we’ll ask.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Signs you need bath re-enamelling in Ystrad
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Most people get in touch when they notice something like this:
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
Before booking anyone
- Who will actually do the work
- How your room will be protected
- How long the guarantee is and what it covers
- What prep work is covered
Nearby places to Ystrad
What else we do in Ystrad
About our accreditations · Every repair comes with a one-year guarantee.
